|
THE PRIME
MINISTER
--------
|
THE SOCIALIST
REPUBLIC OF VIETNAM
Independence – Freedom – Happiness
--------------
|
|
No.:
18/2019/QD-TTg
|
Hanoi, April 19,
2019
|
DECISION
IMPORT
OF USED MACHINERY, EQUIPMENT AND TECHNOLOGICAL LINES
Pursuant to the Law on government organization
dated June 19, 2015;
Pursuant to the Law on foreign trade management
dated June 12, 2017;
Pursuant to the Government’s Decree No.
69/2018/ND-CP dated May 15, 2018 elaborating some articles of the Law on foreign
trade management;
At the request of the Minister of Science and
Technology;
The Prime Minister promulgates a Decision on
import of used machinery, equipment and technological lines.
Chapter I
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 1. Scope
1. This Decision provides for
criteria, documentation, procedures for import and inspection of used
machinery, equipment and technological lines in HS Chapter 84 and Chapter 85 on
the List of exports and imports of Vietnam meant to be imported and used for
manufacture in Vietnam and that are not on the lists of goods banned from
import compiled by the government, the Prime Minister, Ministries, and
ministerial agencies in accordance with regulations laid down in the
Government's Decree No. 69/2018/ND-CP dated May 15, 2018.
2. This Decision does not
apply to import of used machinery, equipment and technological lines that are:
a) transited or transshipped;
b) under merchanting;
c) temporarily imported for re-export;
d) temporarily imported for re-export in other
forms prescribed in Article 15 and temporarily exported for re-import as
prescribed in Article 17 of the Government's Decree No. 69/2018/ND-CP dated May
15, 2018 (except for those temporarily imported to serve execution of
processing contracts; those imported for manufacturing or execution of
construction projects);
dd) imported to execute maintenance/repair
contracts with foreign parties;
e) traded among enterprises in an export-processing
zone or free trade zone; liquidated assets sold by enterprises in an
export-processing zone to other domestic enterprises;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
h) meant to serve research and development and
cannot be domestically manufactured; meant to serve national defense and
security objectives at the request of relevant Ministries;
i) machinery and equipment on the List of
potentially unsafe goods (List of Group 2 goods) issued by relevant Ministries
according to the Law on quality of products and goods;
k) machinery and equipment in specialized sectors
provided for in legislative documents of ministries or ministerial agencies.
Article 2. Regulated entities
This Decision applies to:
1. Organizations and enterprises (hereinafter referred
to as “enterprises”) that import used machinery, equipment and technological
lines.
2. Inspection bodies that
inspect used machinery, equipment and technological lines as prescribed in
this Decision.
3. Regulatory authorities
relevant to the import of used machinery, equipment and technological lines as
prescribed in Article 1 of this Decision.
Article 3. Definitions
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. “machinery or equipment”
means a complete structure comprised of parts, groups of parts, and components
that are interconnected to operate to serve the intended purposes.
2. “technological line” means
a system of machinery, equipment, tools and/or devices that are installed or interconnected
on a fixed site according to a technological process or diagram to ensure
synchronous operation serving manufacturing.
3. “used machinery, equipment
and technological lines” are machinery, equipment and technological
lines that have been assembled and put into operation after they are
manufactured.
4. “age” means the period of
time expressed as years from the year of manufacturing to the year of import of
the used machinery or equipment. Year of import is the year in which the goods
arrive at a Vietnam’s port.
Article 4. Rules for management
of import of used machinery, equipment and technological lines
1. Import of used machinery,
equipment and technological lines must comply with regulations of the Law on
goods import.
2. It is prohibited to import
any used machinery, equipment and technological lines that:
a) have been discarded as announced by exporting
countries because of their obsolescence, low quality of causing environmental
pollution; or
b) fail to satisfy safety, energy saving, and
environmental protection requirements prescribed by applicable law.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Chapter II
IMPORT CRITERIA FOR USED
MACHINERY, EQUIPMENT AND TECHNOLOGICAL LINES
Article 5. Import criteria for
used technological lines
A used technological line may be imported if it
satisfies the following criteria:
1. It is manufactured in
accordance with:
a) National Technical Regulations (QCVN) on safety,
energy saving, and environmental protection;
b) In case of unavailability of National Technical
Regulations (QCVN) for a technological line to be imported, it must be
manufactured in conformity with technical indicators of Vietnam’s Standards
(TCVN) or Standards of G7 countries or Korea with regard to safety, energy
saving, and environmental protection.
2. Remaining capacity (which
is the number of products that the technological line produce in a given time
period) or performance must achieve at least 85% of its design capacity or
performance.
3. The amount of raw materials
or energy consumed by the technological line shall not exceed 15% of its design
consumption level.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
5. A technology comprised in
the technological line to be imported is being applied by at least 03
manufacturers of member countries of Organization for Economic Cooperation and
Development (OECD).
Article 6. Import criteria for
used machinery and equipment
A piece of used machinery or equipment may be
imported if it satisfies the following criteria:
1. Its age does not exceed 10
years. Ages of machinery and equipment in certain specific fields are provided
for in the Appendix I enclosed herewith.
2. It is manufactured in
accordance with:
a) National Technical Regulations (QCVN) on safety,
energy saving, and environmental protection;
b) In case of unavailability of National Technical
Regulations (QCVN) for the type of machinery or equipment to be imported, it
must be manufactured in conformity with technical indicators of Vietnam’s Standards
(TCVN) or Standards of G7 countries or Korea with regard to safety, energy
saving, and environmental protection.
Chapter III
DOCUMENTATION AND
PROCEDURES FOR IMPORTING USED MACHINERY, EQUIPMENT AND TECHNOLOGICAL LINES
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. Import documents:
Apart from the import documents prescribed by the
Law on customs, the importer must submit additional documents, including:
a) The copy of the Certificate of enterprise
registration bearing the importer’s seal. In case of entrusted import, the
import entrustment agreement must be submitted;
b) The inspection certificate issued by a
designated inspection body that meet the requirements laid down in Article 11
hereof. Contents of such inspection certificate must conform to Points a, b, c,
d, dd Clause 1 Article 10 hereof.
2. Import procedures:
a) The importer shall submit a set of import
documents and additional documents mentioned in Clause 1 of this Article to the
customs authority where the customs declaration is registered;
b) The customs authority shall only initiate
customs clearance procedures as regulated if import documents and additional
documents prescribed in Clause 1 of this Article are sufficient and valid, and
the inspection certificate shows that the used technological line satisfies
requirements in Article 5 hereof.
Article 8. Documentation and
procedures for importing used machinery and equipment
1. Import documents:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
a) The copy of the Certificate of enterprise
registration bearing the importer’s seal. In case of entrusted import, the
import entrustment agreement must be submitted;
b) The original of manufacturer’s certification
that the manufacturing year and manufacturing standards applied to the used
machinery or equipment are conformable with Article 6 hereof if the machinery
or equipment to be imported have been manufactured in any G7 countries or
Korea. That certification must be consularly legalized and accompanied by its
Vietnamese translation;
c) The inspection certificate issued by a
designated inspection body that meet the requirements laid down in Article 11
hereof if the machinery or equipment to be imported has been manufactured in
any G7 countries or Korea without the manufacturer's certification or the
machinery or equipment to be imported has been manufactured in a country other
than G7 countries and Korea. Contents of such inspection certificate must
conform to Points a, b, c, d, e Clause 1 Article 10 hereof.
2. Import procedures:
a) The importer shall submit a set of import
documents and additional documents mentioned in Clause 1 of this Article to the
customs authority where the customs declaration is registered;
b) The customs authority shall only initiate
customs clearance procedures as regulated if received import documents and
additional documents prescribed in Clause 1 of this Article are sufficient and
valid. If the inspection certificate is submitted according to Point c Clause 1
of this Article, it must include the conclusion that the used machinery or
equipment satisfies requirements in Article 6 hereof.
3. Putting goods into storage:
a) At the time of submitting import documents as
prescribed in Clause 1 of this Article, if an importer of the used machinery or
equipment fails to provide the manufacturer’s certification as prescribed in
Point b Clause 1 of this Article and the inspection certificate as prescribed
in Point c Clause 1 of this Article, the importer may put goods into storage in
accordance with the Law on customs after submitting the application for
inspection bearing the certification by the inspection body as prescribed in this
Decision to the customs authority;
b) Within 30 working days from the day on which
machinery or equipment is put into storage, the importer must submit the
inspection certificate to the customs authority. The customs authority shall
only initiate customs clearance procedures as regulated if import documents and
additional documents prescribed in Clause 1 of this Article are sufficient and
valid, and the inspection certificate includes the conclusion that the used
machinery or equipment satisfies requirements in Article 6 hereof.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 9. Other cases of
importing used machinery and equipment
1. If an enterprise wishes to
import used machinery or equipment whose age exceeds the age limit prescribed
in Clause 1 Article 6 hereof but remaining capacity (which is the number of
products that the machinery or equipment produces in a given time period) or
performance achieves 85% or above of its design capacity or performance, and
amount of raw materials or energy consumed by that machinery or equipment does
not exceed 15% of its design consumption level to serve its manufacturing in
Vietnam, it shall submit an application for import license, including all
required documents, directly or by post or through the online public service
portal to the Ministry of Science and Technology for consideration and processing.
2. The application includes:
a) The application form for approval for import of
used machinery or equipment using the form provided in the Appendix II enclosed
herewith, including explanations about the necessity of import of used
machinery or equipment to maintain manufacturing and business operations, the
plan for using machinery or equipment and the necessity of used machinery or
equipment to be imported in the technological line;
b) The copy of the Certificate of enterprise
registration bearing the enterprise’s seal;
c) The inspection certificate issued by a
designated inspection body as regulated in Article 11 hereof. Contents of such
inspection certificate must conform to Points a, b, c, d, g Clause 1 Article 10
hereof;
3. Application processing
procedures:
a) In case the received application is insufficient
or invalid:
- The received application is
immediately returned to the enterprise if it is directly submitted at the
single-window section of the Ministry of Science and Technology;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- If the application is
submitted by post, within 02 working days from the receipt of the application,
the Ministry of Science and Technology shall request the enterprise in writing
to complete its application.
b) Within 02 working days from the receipt of the
sufficient and valid application, the Ministry of Science and Technology shall
send written request, accompanied by photocopies of application documents, to
relevant ministries and ministerial agencies for getting their opinions. The
Ministry of Science and Technology may consult specialists about used machinery
or equipment to be imported if it is deemed necessary;
c) Within 10 working days from the receipt of the
written request from the Ministry of Science and Technology, the requested
ministries, ministerial agencies and/or specialists must give their opinions
about the import of machinery and equipment used in their managing fields, and
about the enterprise's application for license to import used machinery or
equipment;
d) Within 03 working days from the receipt of
written opinions from relevant ministries, ministerial agencies and/or
specialists, the Ministry of Science and Technology shall give written response
to the enterprise. If the enterprise’s application is refused, such written response
must indicate reasons for refusal.
4. Import documents and
procedures:
a) Import documents:
Apart from the import documents prescribed by the
Law on customs, the enterprise is required to submit the written approval for
its import of used machinery or equipment given by the Ministry of Science and
Technology as regulated in Clause 3 of this Article;
b) Import procedures:
The enterprise shall submit import documents and
the document mentioned in Point a of this Clause to the customs authority where
the customs declaration is registered for initiating customs clearance
procedures as regulated.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
INSPECTION OF USED
MACHINERY, EQUIPMENT AND TECHNOLOGICAL LINES
Article 10. Certificate of
inspection of used machinery, equipment and technological lines
1. A certificate of inspection
of used machinery, equipment or technological line as regulated in
this Decision must, inter alia, include:
a) Name, manufacturing year, brand, number, model,
name of country of manufacturing, and name of manufacturer of the used
machinery or equipment;
b) Time and location of inspection;
c) Status of the inspected machinery, equipment or
technological line (operating or out of order);
d) Inspection method or process; number and name of
National Technical Regulation (QCVN), National Standard (TCVN) or national
standard of one of G7 countries or Korea with regard to safety, energy saving,
and environmental protection (if any) employed to evaluate the conformity of
technological line as regulated in Clause 1 Article 5 or evaluate the
conformity of machinery or equipment as regulated in Clause 2 Article 6 hereof;
In case National Technical Regulation (QCVN),
National Standard (TCVN) or national standard of one of G7 countries or Korea
with regard to safety, energy saving, and environmental protection is not
available when inspecting used machinery, equipment or technological line, this
content must be specified in the inspection certificate.
dd) With regard to inspection of used technological
lines: Evaluate and assess inspection results according to each criterion
specified in Clauses 1-5 Article 5 hereof, and reach the conclusion whether the
used technological line satisfies requirements in Article 5 hereof or not.
Regarding the criterion specified in Clause 5 Article 5, name of country, and
name of manufacturer applying technologies, contact address, website (if any),
and capacity must be specified;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
g) With regard to inspection of machinery and
equipment in cases provided for in Article 9 hereof, make evaluation and
assessment of:
- Technical specifications of
machinery/ equipment;
- Status of machinery/
equipment;
- Maintenance of machinery/
equipment;
- Its satisfaction of
criterion in Clause 2 Article 6 hereof;
- Level of satisfaction of
safety, energy saving and environmental protection standards;
- Remaining capacity (which is
the number of products that the machinery/equipment produces in a given time
period) or performance compared to its design capacity;
- Amount of raw materials/
energy consumed by the machinery or equipment compared to its design
consumption level;
- Remaining useful life of
piece of machinery/ equipment;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Validity of an inspection
certificate:
a) With regard to a used technological line, the
inspection certificate is valid if it has been granted within 18 months before
the technological line arrives at a Vietnam’s port;
b) With regard to a piece of used
machinery/equipment, the inspection certificate is valid if it has been granted
within 06 months before the machinery/equipment arrives at a Vietnam’s port.
3. The inspection of a used
technological line according to criteria in Article 5 hereof must be conducted
in the exporting country while the technological line is operating.
Article 11. Application and
procedures for designation as inspection body for used machinery, equipment and
technological lines
1. The Ministry of Science and
Technology shall cooperate with relevant ministries and ministerial agencies in
designating and accrediting, under bilateral or multilateral agreements,
inspection bodies for used machinery, equipment and technological lines, and
publishing the list of designated/accredited inspection bodies on the portal of
Ministry of Science and Technology for serving enterprises’ selection of
inspection services.
2. Requirements to be
satisfied by an inspection body:
a) Regarding a domestic inspection body:
It has the Certificate of registration of
inspection services granted according to the Government’s Decree No.
107/2016/ND-CP dated July 01, 2016, in which inspection of machinery, equipment
and technological lines must be specified.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
It must comply with the law of the host country on
inspection services and has been accredited by an accreditation body that is a
signatory of conformity assessment mutual recognition agreements of regional or
international accreditation organizations with regard to inspection of
machinery, equipment and technological lines.
3. Application for
registration and procedures for designation as an inspection body:
a) Application for registration and procedures for
designation as a domestic inspection body shall conform to Article 18b, Article
18d of the Government’s Decree No. 132/2008/ND-CP dated December 31, 2008, as
amended in Clause 8 Article 1 of the Government’s Decree No. 74/2018/ND-CP
dated May 15, 2018;
b) An application for registration of designation
as a foreign inspection body includes the documents prescribed in Points a, c,
d, e Clause 1 Article 18d (for initial registration) or Points a, c, d, e
Clause 2 Article 18d (for change or addition of designated inspection
fields/scope) of the Government’s Decree No. 132/2008/ND-CP dated December 31,
2008, as amended in Clause 8 Article 1 of the Government’s Decree No.
74/2018/ND-CP dated May 15, 2018, and the copy of the license to provide
inspection services issued by a competent authority of the country in which the
inspection body registered, enclosed with the consularly legalized Vietnamese
translation. Foreign language documents included in the application must be
translated into Vietnamese.
Procedures for designation as a foreign inspection
body shall conform to Article 18d of the Government’s Decree No. 132/2008/ND-CP
dated December 31, 2008, as amended in Clause 8 Article 1 of the Government’s
Decree No. 74/2018/ND-CP dated May 15, 2018.
Chapter V
IMPLEMENTATION
Article 12. Responsibility of
Ministry of Science and Technology
1. Take charge and cooperate
with other Ministries, ministerial agencies and Provincial People’s Committees
in managing the import of used machinery, equipment and technological lines set
out in this Decision and relevant documents.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3. Cooperate with other
Ministries, ministerial agencies and Provincial People’s Committees in
inspecting the observance of regulations of law on safety, economical and
effective use of energy, environmental protection with regard to used
machinery, equipment and technological lines imported by enterprises when they
are put into operation, and imposing penalties for violations in accordance
with applicable regulations of law.
4. Cooperate with the Ministry
of Finance in periodically producing statistics about import of used machinery,
equipment and technological lines (importers’ names, addresses, fields,
countries of origins, import value), and cases of violations in which goods
must be re-exported and penalties are imposed, and reporting to the Prime
Minister.
5. Designate and accredit
inspection bodies for used machinery, equipment and technological lines, and
publish the list of designated or accredited inspection bodies on its portal.
6. Take charge and cooperate
with other Ministries and ministerial agencies in inspecting the inspection of
used machinery, equipment and technological lines by designated or accredited inspection
bodies in accordance with applicable regulations of law.
Article 13. Responsibility of
ministries and ministerial agencies
1. Cooperate with the Ministry of Science and
Technology in organizing the implementation of this Decision.
2. Based on social – economic
development as well as state management requirements in specialized fields,
suggest criteria on age of used machinery and equipment in their managing
fields to the Ministry of Science and Technology for consolidating and
reporting to the Prime Minister.
Article 14. Responsibility of
importers
1. Import used machinery,
equipment and technological lines in accordance with this Decision and relevant
legislative documents.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 15. Responsibility of
designated/accredited inspection bodies
1. Carry out inspection of
used machinery, equipment and technological lines in accordance with this
Decision and relevant legislative documents.
2. Ensure independent,
objective and scientific inspection; comply with applicable regulations of the
law on inspection and assume legal responsibility for accuracy of inspection
results; bear inspection and supervision by competent authorities regarding
inspection services.
3. Send a copy of the
inspection certificate within 15 working days from the signing date of the
inspection certificate to the Ministry of Science and Technology in the
following circumstances:
a) Inspection of a used technological line;
b) Inspection of used machinery/ equipment in case
the issued inspection certificate specifies the unavailability of National
Technical Regulation (QCVN), National Standard (TCVN) or national standard of
one of G7 countries or Korea with regard to safety, energy saving, and
environmental protection with respect to used machinery, equipment and
technological lines according to Point d Clause 1 Article 10 hereof.
4. Prepare and submit annual
report by December 15 of the same year and ad hoc reports on inspection of used
machinery, equipment and technological lines to the Ministry of Science and
Technology.
Article 16. Transitional
clauses
1. With regard to applications
for import of used machinery and equipment approved by Ministry of Science and
Technology as regulated in Article 13 of the Circular No. 23/2015/TT-BKHCN
before the effective date of this Decision, enterprises may continue their
import of used machinery and equipment in accordance with the Circular No.
23/2015/TT-BKHCN dated November 13, 2015 by the Minister of Science and
Technology.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3. With regard to investment
projects requiring import of used machinery/equipment, having carried out
procedures according to Clause 2 Article 6 of the Circular No. 23/2015/TT-BKHCN
and been granted the Investment Certificate/ Decision on investment proposal before
the effective date of this Decision, enterprises may continue importing used
machinery/equipment according to the Circular No. 23/2015/TT-BKHCN.
4. As from the date of
promulgation of this Decision, inspection bodies are recommended to prepare
documents, meet capacity requirements, and apply for registration as inspection
bodies according to this Decision.
Inspection bodies whose names published on the
portal of the Ministry of Science and Technology according to the Circular No.
23/2015/TT-BKHCN are allowed to provide inspection of used machinery, equipment
and technological lines according to this Decision within 60 days from the date
of entry into force of this Decision.
Article 17. Implementation
1. This Decision comes into
force from June 15, 2019.
2. Where the legislative
documents referred to in this Decision are amended or replaced, the new ones
shall apply.
3. Difficulties that arise
during the implementation of this Decision should be reported to the Ministry
of Science and Technology for consolidation and reporting to the Prime
Minister.
4. Ministers, heads of
ministerial agencies, heads of Governmental agencies, Chairpersons of
Provincial People’s Committees, relevant organizations and individuals shall be
responsible for implementing this Decision./.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
PP. THE PRIME
MINISTER
DEPUTY PRIME MINISTER
Trinh Dinh Dung
APPENDIX I
AGE OF MACHINERY AND EQUIPMENT IN SPECIFIC FIELDS
(Enclosed with the Prime Minister’s Decision No. 18/2019/QD-TTg dated April
19, 2019)
No.
Field/machinery,
equipment
HS code
Age of
machinery/ equipment (expressed in years), not exceeding
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
a
Calendering or other rolling machines, other than
for metals or glass, and cylinders therefor.
84.20
20
b
Converters, ladles, ingot moulds and casting
machines, of a kind used in metallurgy or in metal foundries.
84.54
20
c
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
84.55
20
d
Machine-tools for working any material by removal
of material, by laser or other light or photon beam, ultrasonic,
electro-discharge, electro-chemical, electron beam, ionic-beam or plasma arc
processes; water-jet cutting machines.
84.56
20
dd
Machining centres, unit construction machines (single
station) and multi-station transfer machines, for working metal.
84.57
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
e
Lathes (including turning centres) for removing
metal.
84.58
20
g
Machine-tools (including way-type unit head machines)
for drilling, boring, milling, threading or tapping by removing metal, other
than lathes (including turning centres) of heading 84.58.
84.59
20
h
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
84.60
20
i
Machine-tools for planing, shaping, slotting, broaching,
gear cutting, gear grinding or gear finishing, sawing, cutting-off and other
machine-tools working by removing metal or cermets, not elsewhere specified
or included.
84.61
20
k
Machine-tools (including presses) for working
metal by forging, hammering or die-stamping; machine-tools (including
presses) for working metal by bending, folding, straightening, flattening,
shearing, punching or notching; presses for working metal or metal carbides,
not specified above.
84.62
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
l
Other machine-tools for working metal or cermets,
without removing material.
84.63
20
m
Machines and mechanical appliances having
individual functions, not specified or included elsewhere in this Chapter.
84.79
20
2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
a
Dryers for wood, paper pulp, paper or paperboard
84.19.32
15
b
Machine-tools (including machines for nailing,
stapling, glueing or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
84.65
20
c
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
84.79.30
20
3
Paper and paper pulp production
a
Machines and mechanical appliances
84.39
84.40
84.41
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
* Calculation of age (X): X = Year of import – Year
of manufacturing
Age is expressed in years only.
E.g.: Equipment A is produced in January, 2008 and imported
to Vietnam in December, 2018.
X = 2018 - 2008 = 10 (years)
APPENDIX II
(Enclosed with
the Prime Minister’s Decision No. 18/2019/QD-TTg dated April 19, 2019)
[NAME OF
ENTERPRISE]
--------
SOCIALIST
REPUBLIC OF VIETNAM
Independence – Freedom – Happiness
--------------
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
………[location
& date]
To: Ministry of
Science and Technology
1. Applicant:
2. Tax code: ...........................................................................................
3. Address:…………………………………………………………………………..……………
4. Telephone/
fax:…………………………………………………………………….
5. Legal representative:
............................................................................................
6. Number of Certificate of
enterprise registration: ……Date of issue: ............................
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
7. We need to import the
following used machinery/equipment:
No.
Name of
equipment
Quantity
Unit
(estimated)
value
Manufacturing
year
Capacity/
performance
Country of
manufacturing/ origin
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
9. Explanations about the
necessity of import of used machinery/equipment to maintain manufacturing and
business operations, the plan for using imported machinery/equipment, and the necessity
of used machinery/equipment to be imported in the technological line:
.............................................................................................................................................
.............................................................................................................................................
.............................................................................................................................................
.............................................................................................................................................
Enclosed documents:
a) The copy of the Certificate of enterprise
registration bearing the enterprise’s seal;
b) The inspection certificate issued by an
inspection body;
………………………………..(name of enterprise) hereby declares
that the used machinery/equipment to be imported as described above shall be
used to directly serve our manufacturing in Vietnam, and the machinery/equipment
to be imported satisfies safety, energy saving and environmental protection
requirements, and shall take legal responsibility for our declaration as well
as the accuracy of statements herein./.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Place of receipt:
- As above;
- Kept at: ………………
ENTERPRISE’S
LEGAL REPRESENTATIVE
(signature and seal)
Note: Enterprises should consider
concluding sales contracts after submitting import documents and obtaining
written approval for import from the Ministry of Science and Technology.