|
MINISTRY OF
DEFENSE
-------
|
SOCIALIST
REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
--------------
|
|
No.:
117/2007/QD-BQP
|
Hanoi, 30 July
2007
|
DECISION
ON
ISSUING THE ESTIMATED NORM FOR DETECTION AND DESTRUCTION OF BOMS, MINES AND
EXPLOSIVE OBJECTS
MINISTER OF DEFENSE
Pursuant to Decree No. 30/2004 / ND-CP dated
01/16/2004 of the Government on functions, tasks, powers and apparatus
organization of the Ministry of Defense;
Implementing the agreement of the Ministry of
Construction in document No. 1487/BXD-KTTC dated 12 July 2007 upon agreed norm
for detection and destruction of boms, mines and explosive objects
Considering the proposal of Engineering Arm
Commander in the Statement No. 1674/TTr-CB dated 18 July 2007,
DECIDES:
Article 1. Issuing the “Estimated norm for detection and destruction of
boms, mines and explosive objects” for site clearance in service of
construction of works nation-wide.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 3. This Decision takes effect after 15 days from its signing
date and replaces the estimated No. 41/2004/QD-BQP dated 08 April 2004 of the
Minister of Defense.
Article 4. General Staff, Heads of the General Departments, Commanders
of Military Zones, Army Corps, Arms and Heads of agencies and units concerned
are liable to execute this Decision. /.
FOR THE
MINISTER
DEPUTY MINISTER
Sr. Lt. Gen.
Nguyen Khac Nghien
Part 1.
EXPLANATION AND GENERAL
PROVISIONS
1. Estimated norm for
detection and destruction of boms, mines and explosive objects (DDBMEO)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Estimated norm for
detection and destruction of boms, mines and explosive objects is defined by
the following grounds:
- Technical Procedure for detection and handling of
boms, mines and explosive objects issued with Decision No. 95/2003/QD-BQP dated
07 August 2003 of the Minister of Defense.
- Obstacle removal and arrangement Charter issued
in September 1987 of the Engineering High Command.
- Estimated norms for detection and handling of
boms, mines and explosive objects issued by the Ministry of Defense in
documents:
+ No. 1128/QP dated 31 July 1987 of the Ministry of
Defense on detection and handling of boms, mines and explosive objects.
+ No. 1162/QP dated 24 November 1995 of the
Ministry of Defense on detection and handling of boms, mines and explosive
objects.
+ No. 813/1999/QD-BQP dated 05 June 1999 of the
Ministry of Defense on detection and handling of boms, mines and explosive
objects.
+ No. 41/2004/QD-BQP dated 08 April 2004 of the
Ministry of Defense on detection and handling of boms, mines and explosive
objects.
3. Consumption of materials,
labor and performance machinery
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Is the amount of primary materials, auxiliary
materials (including lost materials and transferred materials) need for
performance and completion of work volume of detection and destruction of boms,
mines and explosive objects.
3.2. Labor consumption:
Is a number of direct labor days (of professional
servicemen) to perform work volume of of detection and destruction of boms,
mines and explosive objects and personnel for detection and handling of boms,
mines and explosive objects. Due to the special nature of this work, so the
labour is calculated according to the worker grade of primary professional
serviceman of 10 grades.
3.3. Consumption of performance machinery
Is a number of shifts directly using machinery to
finish a work volume unit of detection and destruction of boms, mines and
explosive objects.
4. Contents of Volume of
estimated norm for detection and destruction of boms, mines and explosive
objects
This Volume consists of 02 parts:
- Part I. Explanation and general provisions
- Part II. Estimated norm, including 3 chapters
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
+ Chapter II: Detection and destruction of boms,
mines and explosive objects on the ground.
+ Chapter III: Detection and destruction of
underwater boms, mines and explosive objects
- 01 Annex: Norm of investigation and survey cost
to prepare plan and estimate; inspection of quality of detection and destruction
of boms, mines and explosive objects
5. Other provisions
5.1. Signals
Are all magnetic objects (or non-magnetic) lying in
the ground or underground including iron, steel, shrapnel, types of
bomb-mine-explosive object...which man or detectors currently used can detect
them (indicated by change of sound, deflection of hand of clock, by some kinds
of bar or number on liquid-crystal display regardless of size ...) but they
must have size ≥ (30 x 7,6) mm (equivalent to a rifle bullet) and must be
digged up and handled.
5.2. Signal density
Signal density: is a number of signals to be digged
for identification of categories to conduct the handling and is averaged over a
certain area unit (signal density of various kinds are directly related to the
schemes and plans for performance and cost estimation for detection and
destruction of boms, mines and explosive objects);
5.3. Areas having minefields
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
5.4. Areas having no minefield:
Are the areas with unexploded bombs-mines-explosive
objects remaining after war, including shrapnels or steel debris. When
conducting the building of infrastructure works and restoring production, it is
required to perform the detection and handling of bombs, mines and explosive
objects. The bombs, mines and explosive objects usually lie in a depth up to 5m
underground, particularly to 10-15m.
5.5. Special areas:
Are areas which are used as bomb and munition
destruction site: munition depots exploded many times; around military bases,
posts or battlefields of the US and the puppet regime; a number of areas in the
Northern border belt with multiple overlapped layers of mine.
For special areas, it is required to prepare plan
and estimate of detection and destruction of bombs, mines and explosive objects.
5.6. Mine detection:
Providing for the detection and destruction of
boms, mines and explosive objects and magnetic objects with mine detector at a
depth up to 0.3m. (according to the features of the machine).
5.7. Bomb detection:
Providing for the detection and destruction of
boms, mines and explosive objects and magnetic objects with bomb detector at a
depth up to 0.3 - 5 – 10 m and deeper (according to the features of the
machine).
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
The transportation of boms, mines and explosive
objects to another place for destruction has a separate plan which shall be
submitted to the competent authorities for approval. The expenditure for
detection and destruction of collected boms, mines and explosive objects is
from the contingency expenditure for detection and destruction of boms, mines
and explosive objects from 3-5% of estimated value
5.9. Identification of range of detection and
destruction of boms, mines and explosive objects:
- The identification of range of detection and
destruction of boms, mines and explosive objects must have scientific basis and
comply with current regulations.
- The identification of range of detection and
destruction of boms, mines and explosive objects must be by professional bodies
of the Ministry of Defense. Such professional bodies have consultation function
and directly identify the range of detection and destruction of boms, mines and
explosive objects as required and take responsibility for performance result.
5.10. Identification of area of detection
and destruction of boms, mines and explosive objects
Based on the features of detector, purpose of use
and safety assurance requirements for works (both in performance and use in the
future), the following areas shall be included:
- Area of usable space of works includes the whole
or a part of area assigned for use (based on the survey data and provided
documents on pollution reality of bombs-mines-explosive objects).
- Area of safety corridor specified of each works
taking into account the importance of such works.
- For areas with uneven topography (with slope),
the area for detection and handling of bombs-mines-explosive objects is
calculated as per the topographical slope.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
This norm is a basis to calculate the detailed unit
price for each type of work for preparing estimate, payment and finalization of
work volume of detection and destruction of boms, mines and explosive objects
in capital construction. It is necessary to apply the following provisions upon
application of norm:
- Material cost: includes the cost of primary
material, auxiliary material and transferred material (if any). The material
cost is defined based on the local price of material at lhe time of estimate
preparation.
- Labor cost: is the total direct labor cost for
performance of detection and destruction of boms, mines and explosive objects.
+ For projects using state capital, the labor cost
is defined based on workday allowance benefits as prescribed by the State.
+ For projects using capital sources other than
state capital, the labor cost is defined based on the salary of primary
professional serviceman of group I (grade 7/10 and 8/10) as per the current
basic payroll and other prescribed allowances (hazard, danger allowances level
0.4, mobility allowances level 0.4, area allowance and attraction allowances
when working at localities having regulations on entitlement of corresponding
allowances.
- Performance machinery is based on the uniform price
list of machine shift issued by the Ministry of Defense and defined by the
method of preparation for machine shift instructed by the Ministry of
Construction.
- The costs:
+ Overall cost calculated by 40% of labor cost in
the estimate.
+ Advanced taxable income by 5.5% of direct cost in
the estimate (no calculation of advanced taxable income for projects using
state capital).
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
The application of classification of signal density
for application of norm and classification of signal density (table 3 and table
6) is used for preparation of performance estimate and based on a number of actual
signals upon finalization but not exceeding the prescribed number corresponding
to each type of depth to dig and handle in table 4 and 5 of this Volume of
estimated norm.
In case the work of detection and destruction of
boms, mines and explosive objects in which the technical requirements and
performance conditions are different from the provisions of norm, the investor
and performing units shall, based on the requirements and specific conditions,
temporarily calculate the norm and submit it to the competent authorities for
approval.
7. Classification of signal
density areas applying the norm
No.
Classification
Name of
localities (from district, town or higher level)
1
Area 4
Vietnam-China border areas (5 km from border edge
into our country inland); Quang Tri province: all districts and towns;
Thua Thien – Hue province: Phong Dien and Huong Thuy districts.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Area 3
Nghe An province: Ky Son, Do Luong, Nam
Dan, Nghi Loc, Hung Nguyen, Vinh city; Ha Tinh province: All districts
and towns except for Thach Ha district; Quang Binh province: All
districts except for Dong Hoi town; Thua Thien Hue province: all
remaining districts and cities.
3
Area 2
Inner cities and towns: Ha noi, Hai Phong, Bac
Giang, Thai Nguyen, Thanh Hoa; Nghe An province: all remaining districts
and towns; Ha Tinh province: Thach Ha district; Quang Binh
province: Dong Hoi town; Da Nang city: all district except for Ngu Hanh Son; Quang
Nam province: all districts and towns except for Hoi An town and Tra My
district; Quang Ngai province: All districts and towns; Ninh Thuan
province: All districts and towns except for Ninh Hai district; Kon Tum
province: All districts and towns; Dak Lak province: MaDrak, Dak Rlap,
Krong Bong, Buon Don districts: Gia Lai province: Pleiku city, LaGrai
and Chu Prong districts; Dong Nai province: Nhon Trach district; HCM
City: Cu Chi, Can Gio districts; Long An: All districts except for Tan An
town, Can Giuoc and Thanh Hoa districts; Binh Thuan province: Tuy
Phong , Tanh Linh, Ham Tan districts; Binh Duong province: Ben Cat
district; Tay Ninh province: Ben Cau, Tan Bien, Tan Chau districts; Can
Tho province: Chau Thanh, Thot Not districts, Can Tho city, Vi Thanh
town; Tien Giang province: Go Cong, Cho Gao, My Tho, Chau Thanh
districts, Go Cong town; Soc Trang province: Soc Trang town, My Tu,
Long Phu, Ke Sach, Dam Doi, Cai Nuoc districts; Tra Vinh province: Tra
Vinh town; Vinh Long province: Mang Thit, Long Ho, Vung Liem districts,
Vinh Long town; Dong Thap province: Sa Dec town; Bac Lieu
province: Bac Lieu town.
4
Area 1
All remaining areas in addition to localities of
areas 2, 3, 4 in the areas of the country.
Table 1.
Classification of forests to be cleared for site preparation
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Content
I
Plain or hill of thatch, reed, rose myrtle,
melasstomaceae, tumbleweed
in the dry areas and sometimes there are young trees or trees with diameter
greater than or equal to 10 cm.
II
- Young tree forest with density of young trees
and creepers accounted for less than 2/3 area and there are 5 -25 trees with
diameter from 5 – 10 cm over 100m2
- Land field with thick reeds, tumbleweed in the
swampy and waterlogged topography.
- Land field with avicennia marina, spondias mombin, bruguiera…in
the dry area.
III
- Harvested tree forest, young trees and creepers
accounted for 2/3 area and there are 30 -100 trees with diameter from 5-10
over 100m2 with trees larger than 10cm in diameter.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Land field with avicennia marina, spondias mombin, bruguiera…in
the dry area.
IV
- Forest of bamboo, neohouzeaua, bambusa
procera with thick density
- Land field with cajuput, mangrove …in the swampy
and waterlogged topography.
Note:
- Diamter of trees is measured at the height of
30 cm from the ground
- For trees greater than 10 cm in diameter to be
converted to standard trees (with diameter from 10 to 20cm)
Table 2. Classification
of soil for digging and signal handling
(Used for digging
and transport)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Group of soil
Name of soil
Standard tool
to identify group of soil
1
2
3
4
I
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Fallen hilly soil or soil brought from other
places (soil of group 4 or less) to pour down but not yet compacted.
Easy scooping with
shovel
2
- Loamy sand or sandy loam.
- Clayish sand
- Wet rich soil but not to the sticky state
- Fallen soil of group 3 or 4 or soil brought
from other places to pour down and already compacted but not to the parent
state
- Alluvium, alluvial sand, rich soil, muddy soil,
porous parent soil with roots, humus, gravel, stone, rubble and architectural
debris up to 10% volume or 50-150kg/1m3
Using improved
shovel to strongly press and scoop
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Loamy clay and sandy clay
- White or yellow clay, loam, acidic soil, alkaline
soil at the state of moisture and softness
- Sandy soil, black soil, humus with gravel and
stone, architectural debris, sweepings or roots from 10-20% volume or from
150-300 kg/1m3
- Sandy soil with great hydrated weight from 1.7
ton/1m3 or more.
Normally using
improved shovel by foot
II
4
- Black soil, crushed sticky hydrated humus
- Loam, loamy and sandy clay hydrated but not
muddy state
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Loam and heavy and tightly structured clay
- Soil on hillside with grass, rose myrtle,
melasstomaceae, gardenia jasminoides
- Soft rich soil
Hoe can be used to
dig
5
- Grey loam with grey color (including turquoise
and grey of lime).
- Soil on hillside with few gravels
- Red soil in hills and mountains
- Clay with small gravels
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Sandy soil, humus, black soil and parent soil
with gravel and stone, architectural debris, from 25-35% volume or from >
300 to 500kg/m3.
Hoe or hoe blade
III
6
- Loam, clay, solid brown soil. Only obtaining
small pieces when using hoe
- Rough and hard acidic soil and alkaline soil
- Soil on dam surface or old road surface
- Soil on hillside with gravels, stone and
thick grass, rose myrtle, melasstomaceae, gardenia
jasminoides
- Tightly-structured loam and clay with pebbles,
gravels, architectural debris, roots > 10% - 20% of volume or 150 -
300kg/m3.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Using hoe with big
blade
7
- Hilly soil with gravel layers with gravel volum
from 25-35% with rocks up to 20% volume
- Soil on madacam road surface or soil roads
paved with debris and broken bricks
- Tightly-structured kaolin, loam or clay with
architectural debris and roots from 20%-30% of volume or > 300 - 500kg in
1m3.
Using small hoe
with blade up to 2.5kg in weight
IV
8
- Soil with rocks> 20-30% volume.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Soil with oyster and shellfish shells (scallop
soil) tightly adherent forming blocks (people in coastal areas often use them
to build walls).
- Soil with pumice
Using small hoe
with blade over 2.5kg in weight and crowbar to dig
9
- Soil with rocks > 30% volume, pebbles,
gravels adhered by clay.
- Soil with interspersed stone ledge and laterit
flag
- Solid gravel soil
Using crowbar,
punch-hammer or hammer to dig
Table 3.
Classification of signal density in areas having no minefield
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
iron, steel, shrapnels, splinters…to be
digged up for handling).
Unit: 10,000 m2
No.
Signal density
Number of
signals
Percentage of
boms, mines and explosive objects
1
Type 1
From > 0 to 100
signals
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
Type 2
From > 100 to
200 signals
From > 3 to ≤
5% of total signals
3
Type 3
From > 200 to
300 signals
From > 5 to ≤
7% of total signals
4
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
From > 300 to
400 signals
From > 7 to ≤ 9%
of total signals
5
Special type
From 400 signals
or more
> 9% of total
signals or more
Table 4:
Classification of signal density applied to areas of detection and destruction
of boms, mines and explosive objects on the ground
Unit: 10,000 m2
STT
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Number of
signals (signals)
Up to a depth
of 0.3m
From >
0.3-3m
From > 3-5m
1
Area 1
From > 0 to 95
From > 0 to 4
From > 0 to 1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Area 2
From > 0 to 190
From > 0 to 8
From > 0 to 2
3
Area 3
From > 0 to 285
From > 0 to 12
From> 0 to 3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Area 4
From> 0 to 380
From > 0 to 16
From > 0 to 4
5
Special area
From > 380 or
more
From > 16
From > 4 or
more
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit: 10,000 m2
No.
Classification
of areas
Number of
signals (signals)
Up to a depth
of 0.5m*
From a depth
> 0.5-1m
Depth > 1m
1
Area 1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
From> 0 to 2
From > 0 to 0.2
2
Area 2
From > 0 to 96
From > 0 to 4
From > 0.2 to 0.5
3
Area 3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
From > 0 to 6
From > 0.5 to 1
4
Area 4
From > 0 to 190
From > 0 to 8
From > 1 to 2
5
Special area
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
From > 8 or more
From > 2 or more
Table 6.
Classification of signal density in areas having minefields
Unit: 10,000 m2
No.
Classification
of minefields
Number of signals
(signals)
Number of boms,
mines and explosive objects
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
From > 0 to 150
From> 1 to ≤ 50
bombs
2
Type 2
From > 150 to
300
From> 50 to ≤
100 bombs
3
Type 3
From > 300 to
450
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4
Type 4
From > 450 to
600
From> 150 to ≤
200 bombs
5
Special type
From > 600 or
more
> 200 bombs
Part 2.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Chapter 1.
SITE CLEARANCE
010.0100. SITE CLEARANCE BY MANUAL METHOD
010.0110. AREAS HAVING MINEFIELDS
Scope of application:
To be applied to all areas having minefields left
over after war in all types of topography such as: plain, midland, forest and
mountain, swamp and coastal mangrove forest.
Contents of work:
- Observing, inspecting and clearing all plants and
creeper (the remaining stumps must not be higher than 0.05 m)
- Removing plants and obstacles out of the
performance area in accordance with technical requirements of detection and
destruction of boms, mines and explosive objects.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Code
Type of work
Consumption
component
Unit
Type of forest
I
II
III
IV
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Site clearance by
hands in areas having minefields
Labor Labor:
- Worker grade of professional serviceman 8/10 on
average
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
111
125
143
167
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3
4
Note: For hilly and mountainous topography with
the slope > 25 degree, the labor cost is multiplied by the coefficient 1.1.
010.0120. AREAS HAVING NO MINEFIELD
Scope of application:
To be applied all areas having boms, mines and
explosive objects left over after war but are not minefields in all types of
topography such as: plain, midland, forest and mountain, swamp and coastal
mangrove forest with obstacles to be cleared (Equivalence of forest types)
Contents of work:
- Observing, inspecting and clearing all plants and
creepers (the remaining stumps must not be higher than 0.05 m)
- Removing all plants and obstacles out of the
performance area. Clearing way, setting stakes and dividing cells (25x25) m in
according with technical requirements of detection and destruction of boms,
mines and explosive objects.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Code
Type of work
Consumption
component
Unit
Type of forest
I
II
III
IV
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Site clearance by
hands in area having no minefield
Labor:
- Worker grade of professional serviceman 7/10 on
average
Work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
80
91
111
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
3
4
Note: For hilly and mountainous topography with
the slope > 25 degree, the labor cost is multiplied by the coefficient 1.1.
010.0200. SITE CLEARANCE BY HANDS COMBINED WITH
GAS OR OIL BURNING
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
To be applied to all areas with or without minefields
in all types of topography such as: plain, midland, forest and mountain, swamp
and coastal mangrove forest with dense trees.
Contents of work:
- Inspecting, felling trees and clearing way 2-3m
wide as service road.
- Burning trees with gas in each celss, inspecting
and removing all unbunrt trees and branches in accordance with technical
requirements of detection and destruction of boms, mines and explosive objects.
- Removing trees, branches and obstacles out of the
area of detection and destruction of boms, mines and explosive objects.
Unit: 10,000 m2
Code
Type of work
Consumption
component
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Type of forest
I
II
III
IV
010.0200
Site clearance by hands combined with gas or oil
burning
Material:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Gas and oil
kg
420
448
476
546
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 8/10 on
average
Work
74
80
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
111
1
2
3
4
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
010.0300. REMOVAL OF BARBED WIRE FENCE WITH
EXPLOSIVE
Scope of application:
Removing single or double barbed wire fence is
applied to areas with minefields in all types of topography such as: plain,
midland, forest and mountain, swamp and coastal mangrove forest.
Contents of work:
- Observing, inspecting and using long explosive
amount to remove fence, clearing minor road, setting stakes and dividing cells.
- Removing all debris of wire, steel stakes and
obstacles out of area of detection and destruction of boms, mines and explosive
objects.
Calculation for
1.0m of barbed wire fence
Code
Type of work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
Type of barbed
wire fence
Single
Double
010.0300
Removal of barbed
wire fence with explosive
Material:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- TNT explosive
kg
2.00
3.00
- Blasting fuse
m
0.50
1.00
- Normal detonator
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.20
1.20
- Wooden splint (2x5x120) cm
Unit
1.00
1.00
- Other materials
%
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Labor:
- Worker grade of professional serviceman 8/10 on
average
Work
0.17
0.25
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
Chapter 2.
DETECTION AND
DESTRUCTION OF BOMS, MINES AND EXPLOSIVE OBJECTS ON THE GROUND
020.0100. DETECTION AND DESTRUCTION OF BOMS,
MINES AND EXPLOSIVE OBJECTS BY HANDS UP TO A DEPTH OF 7CM
Scope of application:
To be applied to areas having minefields with
bounding mines, explosion-sensitive mines and plastic mines and the minefields
with magnetic objects which the detector is not effective.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Preparing, inspecting, setting stakes for cell
division, marking detection strip and using spade and observing with naked eyes
and boring in accordance with technical requirements, detecting, digging up and
safely handling.
- Collecting and transporting boms, mines and
explosive objects or iron debris to the prescribed place
Unit: 10,000m2
Code
Type of work Type
of work
Consumption
component
Unit
Type of forest
Type 1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Type 3
Type 4
020.0100
Detection, digging
and handling of boms, mines and explosive objects by hands up to a depth of
7cm
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Wooden stake Φ 3 x 50cm
Unit
20
20
20
20
- White pennon
Unit
90
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
90
90
- Red pennon.
Unit
25
50
75
100
- Prohibition sign and signboard
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4
4
4
4
- Other materials
% material
1
1
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Labor:
- Worker grade of professional serviceman 8/10 on
average
Work
167
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
200
223
1
2
3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0200. INSPECTION AND ON-THE SPOT DESTRUCTION
OF BOMS, MINES AND EXPLOSIVE OBJECTS UP TO A DEPTH OF 7CM
Scope of application:
To be applied to boms, mines and explosive objects
detected but unsafe for collection, transportation or strange explosive
objects.
Contents of work Contents of work:
- Preparing and re-inspecting type and amount of
boms, mines and explosive objects to be destroyed on the spot.
- Organizing on- the- spot destruction of boms,
mines and explosive objects that cannot be collected or strange explosive
objects.
- Re-inspecting locations after finishing the
destruction of detection and destruction of boms, mines and explosive objects
or strange explosive objects.
- Inspecting and collecting explosion detonating
devices and debris (if any) to remove out of area under detection.
Unit: 01 bomb,
mine, explosive object or strange explosive object
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Type of work
Consumption
component
Unit
Consumption norm
020.0200
Inspecting and
destroying boms, mines and explosive objects on the spot up to a depth of 7cm
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
kg
0.20
- Normal detonator No.8
unit
1.20
- Blasting fuse
m
0.50
- Fabric for wrapping explosive amount
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.15
- Other materials
% material
1.50
Labor:
- Worker grade of professional serviceman 8/10 on
average
Work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
Note: If boms, mines and explosive objects >
3kg in weight, the explosive weight is based on the norm 020.1000
020.0300. DETECTION OF BOMBS, MINES AND
EXPLOSIVE OBJECTS WITH MINE DETECTOR UP TO A DEPTH OF 30CM
020.0310. AREAS HAVING MINEFIELDS
Scope of application:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Contents of work:
- Preparing, setting stakes and stretching wire to
divide detection strip from 1-1.5m wide in accordance with technical procedure.
- Using mine detector for detection in each strip
in accordance with technical requirements to detect all signals up to a depth
of 0.3m; using pennon to mark next to the signal.
Unit: 10,000m2.
Code
Type of work
Consumption
component
Unit
Loại bãi mìn
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Bãi loại 2
Bãi loại 3
Bãi loại 4
020.0310
Detection of boms,
mines and explosive objects with mine detector up to a depth of 0.3m from the
natural ground surface surface in areas having minefields
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Concrete reinforced stakes (0.12x0.12x1.2)m
Unit
4.00
4.00
4.00
4.00
- Wooden stakes Φ 3cm x 50cm
Unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
60
60
60
- Rope Φ 10mm.
m
335
335
335
335
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
30
60
90
120
- Other materials
% material
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
Labor:
- Worker grade of professional serviceman 8/10 on
average
Work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
21.00
23.10
25.41
Performance machine:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Shift
12.73
14.00
15.40
16.94
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
3
4
020.0320. AREAS HAVING NO MINEFIELD
Scope of application:
To be applied to all areas with suspected boms,
mines and explosive objects left over after war but having no minefield.
Contents of work:
- Preparing, setting stakes and stretching wire to divide
detection strip from 1-1.5m wide in accordance with technical procedure.
- Using mine detector for detection in each strip
in accordance with technical requirements to detect all signals up to a depth
of 0.3m; using pennon to mark next to the signal.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Code
Type of work
Consumption
component
Unit
Type of signal
density
Type 1
Type 2
Type 3
Type 4
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Detection of boms,
mines and explosive objects with mine detector up to a depth of 0.3m from the
natural ground surface surface in areas having no minefield
Materials:
- Wooden stakes Φ 3cm x 50cm
Unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
60
60
60
- Rope Φ 10mm.
m
335
335
335
335
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
20
40
60
80
- Other materials
% material
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
Labor:
- Worker grade of professional serviceman 7/10 on
average
Work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
19.10
21.00
23.10
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Shift
11.57
12.73
14.00
15.40
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
3
4
Note: Such norm is not included the consumption of
reinforced concrete stakes but it shall be added based on the reality upon
estimate preparation.
020.0400. DIGGING, INSPECTION AND HANDLING OF
SIGNALS UP TO A DEPTH OF 30CM
Scope of application:
To be applied to all signals which have been marked
upon detected with mine detector
Contents of works:
- Preparing and using mine detector with spade to
re-inspect the location whose signals have been marked. Using engineering
equipment to dig at the signaling location until the signals come out and identify
type of signal.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit: 1 signal (as
an explosive or non-explosive object but with size> (3 x 0.76)cm.
Code
Type of work
Consumption
component
Unit
Soil level at
place with signals
I
II
III
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0400
Digging,
inspection and handling of signals on the ground up to a depth of 30cm
Labor:
- Worker grade of professional serviceman 8/10 on
average
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.040
0.044
0.049
0.053
Performance machine:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Minelab F3 mine detector.
Shift
0.028
0.028
0.028
0.028
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
3
4
If the signals are boms, mines and explosive objects,
each signal is added 0.04 work of 8/10 worker grade for collection and
transport to the place for destruction.
020.0500. INSPECTION AND ON THE SPOT DESTRUCTION
OF BOMS, MINES AND EXPLOSIVE OBJECTS WHICH CANNOT BE COLLECTED OR ARE STRANGE
OBJECTS UP TO A DEPTH OF 30CM
Scope of application:
To be applied to all boms, mines and explosive
objects which cannot be collected or are strange explosive objects
Contents of work:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Preparing and laying explosive amount and fire
and detonation equipment for boms, mines and explosive objects as required.
- Inspecting the location of destruction by
detonation and collecting detonating equipment and debris (if any) and removing
them out of the performance area.
Unit: 1 bomb, mine,
explosive object or strange explosive object
Code
Type of work
Consumption
component
Unit
Consumption norm
020.0500
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Materials:
- TNT explosive
Kg
0.20
- Normal detonator No.8
Unit
1.20
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
m
0.50
- Fabric for wrapping explosive amount
m2
0.15
- Other materials
% material
1.50
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 8/10 on
average
Work
0.17
Performance machinery
- Minelab F3 mine detector
Shift
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
Note: If boms, mines and explosive objects > 3
kg in weight, the weight of explosive is based on norm 020.1000.
020.0600. DETECTING BOMS, MINES AND EXPLOSIVE
OBJECTS WITH BOMB DETECTOR AT A DEPTH FROM 0.3-3 TO 5M OR TO 10M
Scope of application:
To be applied to all areas having boms, mines and explosive
objects at a depth more than 0.3m after detection and destruction of boms,
mines and explosive objects at a depth up to 0.3m from the natural ground
surface.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Preparing and inspecting to determine the
magnetization level of soil, setting stakes, stretching wire and dividing cells
into detections ways 1m apart corresponding to detection depths up to 3-5m and
to 10m.
- Using bomb detector for detection in accordance
with technical requirements to find all signals up to 3-5m and to 10m; raising
pennon to mark next to the location with signals.
Unit: 10,000m2.
Code
Type of work
Consumption
component
Unit
Depth to be
detected
Up to 3m
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Up to 10m
020.0600
Detection with bomb
detector at a depth from 0.3-3m or 5m or to 10m
Materials:
- Wooden stakes (Φ 3 x 50)cm.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
60
60
60
- Rope Φ 10mm
m
335
335
335
- Red pennon (0.4 x 0.6)m
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1,.0
1.0
1.0
- Other materials
% material
1.0
1.0
1.0
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
6.40
7.05
7.76
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster Ferex bomb detector
shift
4.27
4.70
5.17
4032 API
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0700. DIGGING, INSPECTION AND HANDLING OF
SIGNALS UP TO A DEPTH OF 3M
Scope of application:
To be applied to all signals which have been marked
at a depth of 3m from the natural ground surface.
(Volume of digged soil is estimated as per
the data of survey and payment based on the performance volume actually
accepted).
Contents of work:
- Preparing, inspecting and using the engineering
equipment to dig in accordance with technical requirements until the signals
come out (size of hole bottom is 3mx3m).
- Inspecting and identifying signals as boms, mines
and explosive objects or iron debris. If they are iron debris or boms, mines
and explosive objects which are safe for collection and transport, carry out
the collection and transport them to the prescribed place for destruction. If
they are unsafe for collection and transport, destroy them on the spot in
accordance with technical requirements.
- If the signals are boms, mines and explosive
objects, the costs of destruction are added.
Unit: 1m3
digged soil.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Type of work
Consumption
component
Unit
Soil level at
place with signals
I
II
III
IV
020.0700
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Materials:
- Bamboo stakes Φ 8cm - 200cm long
Stake
0.20
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0
0
- Wooden board 3cm thick
m3
0.004
0.004
0
0
- Nail 10cm.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.15
0.15
0
0
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 8/10 on
average
Work
0.71
1.04
1.51
2.34
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster Ferex bomb detector
Shift
0.006
0.006
0.006
0.006
4032 API
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4
Note: In case there is water while digging, it
is added 0.012 shift of COLE water pump for 1m3 digged soil
020.0800. DIGGING, INSPECTING AND HANDLING
SIGNALS UP TO A DEPTH OF 5M
Scope of application:
To be applied to all signals which have been marked
at a depth up to 5m from the natural ground surface.
Contents of work:
- Preparing, inspecting and using the engineering equipment
to dig in accordance with technical requirements until the signals come out
(size of hole bottom is 3mx3m).
- Inspecting and identifying signals as boms, mines
and explosive objects or iron debris. If they are iron debris or boms, mines
and explosive objects which are safe for collection and transport, carry out
the collection and transport them to the prescribed place for destruction. If
they are unsafe for collection and transport, destroy them on the spot in
accordance with technical requirements.
- If the signals are boms, mines and explosive
objects, the costs of destruction are added.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Code
Type of work
Consumption
components
Unit
Soil level at
place with signals
I
II
III
IV
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Digging soil,
inspecting and handling signals of boms, mines and explosive objects to a
depth of 5m (size of hole up to 3m x 3m)
Materials:
- Bamboo pole Φ 8cm, 200cm long.
Stake
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.20
0.10
0
- Wooden board 3cm thick
m3
0.004
0.004
0.002
0
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
0.40
0.40
0.20
0
- Nail 10cm
Kg
0.15
0.15
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0
- Steel wire Φ 2mm
Kg
0.20
0.15
0.12
0
- Other materials
% material
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
1.00
0
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Work
0.76
1.05
1.49
2.23
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster Ferex 4032 detector
Shift
0.008
0.008
0.008
0.008
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
3
4
Note:
In case of digging and handling at place of soft
soil at a depth of 3m, use wooden board as embankment against landslide.
020.0900. DIGGING, INSPECTING AND HANDLING
SIGNALS UP TO A DEPTH OF 10M
Scope of application:
To be applied to all signals which have been marked
at a depth of 10m from the natural ground surface.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Preparing plans for digging and handling to be
submitted to the investor for approval.
- Preparing and using the excavating machine and
engineering equipment to dig in accordance with technical requirements until
the signals come out (size of hole bottom is 3mx3m).
- Inspecting and identifying signals as boms, mines
and explosive objects or iron debris. If they are iron debris or boms, mines
and explosive objects which are safe for collection and transport, carry out
the collection and transport them to the prescribed place for destruction. If
they are unsafe for collection and transport, destroy them on the spot in
accordance with technical requirements.
- If the signals are boms, mines and explosive
objects, the costs of destruction are added.
Unit: 1m3
digged soil.
Code
Type of work
Consumption
components
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Soil level at
place with signals
I
II
III
IV
020.0900
Digging soil,
inspecting and handling signals of boms, mines and explosive objects to a
depth of 10m (size of hole up to 3m x 3m)
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Bamboo pole Φ 8cm, 200cm long.
Stake
0.20
0.20
0.10
0
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
m3
0.004
0.004
0.002
0
- Nail
Unit
0.40
0.40
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0
- Nail 10cm
Kg
0.15
0.15
0.10
0
- Steel wire Φ 2mm
Kg
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.15
0.12
0
- Other materials
%VL
1.00
1.00
1.00
0
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 8/10 on
average
Work
1.14
1,58
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3.35
Performance machinery:
- Foerster Ferex 4032 detector
Shift
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.008
0.008
0.008
- Excavating machine< 0.4m3
Shift
0.005
0.005
0.005
0.005
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
3
4
Note:
In case of digging and handling at place of soft
soil at a depth of 3m, use wooden board as embankment against landslide.
020.1000. ON THE SPOT DESTRUCTION BY EXPLOSION
OF BOMS, MINES AND EXPLOSIVE OBJECTS ON THE GROUND
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
To be applied to boms, mines and explosive objects
easily unsafe for collection and transport or strange explosive objects
detected at a depth of over 30cm.
Contents of work:
- Preparing destruction equipment, shelter,
detonating and guarding stations; wrapping, laying explosive amount and
installing fire equipment.
- Preparing, inspecting and taking measures to
ensure safety, guarding and providing for signals.
- Carrying out detomation of boms, mines and
explosive objects in accordance with the approved techniques and plans.
Unit: 01 bomb, mine
or explosive object
Code
Type of work
Consumption
component
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Weight of 1 bomb,
mine or explosive object (Kg)
≤ 3
>3-15
>15-50
>50-120
>120-250
>250
020.1000
On the spot destruction by explosion of boms, mines
and explosive objects on the ground at a depth greater than 30cm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- TNT explosive packet
Kg
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.40
1.00
4,00
4,00
4,00
- Electric detonator No.8
Cái
1
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
2
2
- Double wire
m
2
4
6
10
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
30
- Fabric for wrapping explosive amount
m2
0
0
0.40
1.00
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Kg
0
0.10
0.15
0.20
0.20
0.20
- Signboard, prohibition sign
Unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.08
0.08
0.08
0.08
0.08
- Other materials
% material
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
1.00
1.00
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
0.34
0.34
0.38
0.38
0.44
0.44
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Work
0.17
0.17
0.19
0.19
0.22
0.22
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Ohmmeter
Shift
0.014
0.014
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.014
0.014
0.014
- Detonating machine
Shift
0.014
0.014
0.014
0.014
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.014
1
2
3
4
5
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Ghi chú:
Note:
In case of transporting boms, mines and
explosive objects to the destruction site, the handling for safety for collection,
cost of transport from the storage to destruction site, cost of digging
destruction hole and arrangement of boms, mines and explosive objects into
destruction hole and guarding are included in the cost of destruction.
Chapter 3.
DEDETECTION AND
DESTRUCTION OF UNDERWATER BOMS, MINES AND EXPLOSIVE OBJECTS
030.0100. DETECTION OF UNDERWATER BOMS, MINES
AND EXPLOSIVE OBJECTS WITH BOMB DETECTOR UP TO A DEPTH OF 0.5M FROM THE WATER
BOTTOM
Scope of application:
To be applied to all areas having boms, mines and
explosive objects lying at a depth up to 0.5m from the water bottom (in calm
waters) and up to 15m in depth.
Contents of work:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Stretching wire to divide the cells into detection
strips 0.5m wide, using bomb detector placed on rubber boat to detect with
proper techniques.
- Detecting all signals under the water bottom up
to a depth of 0.5m (from the natural ground surface of water bottom)
Unit: 10,000m2.
Code
Type of work
Consumption
components
Unit
Water depth
0.5 ÷ 5m
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
>10÷15m
030.0100
Detection of underwater boms, mines and explosive
objects with bomb detector up to a depth of 0.5m from the water bottom
Materials:
- Anchor 50 kg
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.128
0.128
0.128
- Anchor 20 kg
Unit
0.256
0.256
0.256
- Big buoy 1m3/unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.16
0.16
0.16
- Small buoy Φ 12cm
Unit
4.00
4.00
4.00
- Nylon rope Φ
10mm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
210
210
210
- Nylon rope Φ
12mm
m
7.20
14.40
20.40
- Nylon rope Φ
18mm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
8.64
8.64
8.64
- Other materials
% material
1.00
1.00
1.00
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
27.78
30.57
36.66
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster Ferex bomb detector
Shift
9.26
10.19
12.22
4032 API
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Medium-size rubber boat
Shift
9.26
10.19
12.22
- Small- size rubber boat
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
9.26
10.19
12.22
1
2
3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s – Multiplied
by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Medium-size rubber boat with load of 10
people.
3. Small-size rubber boat with load of 3 people.
4. With areas having water depth> 15m (or
offshore), there must be specific plan.
5. Small-size rubber boat is used to transport
detection wire, buoy and anchor to locate and mark the area. The estimated norm
is only calculated for areas for detection with water depth from > 3m and
water width > 50 m or more.
6. A number of concrete stakes (0.15x0.15x1,2)m
shall be based on the actual perimeter of areas for detection for decision, with
a distance of 10 m between 02 nearest stakes (only setting concrete stakes to
mark the range of detection in areas adjacent to the shore).
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Scope of application:
To be applied to all areas having boms, mines and
explosive objects lying at a depth from 0.3 -3m or to 5m from the water bottom
(in calm waters) and a water depth up to 15m and after finishing detection and
handling of boms, mines and explosive objects at a depth up to 0.5m from water
bottom.
Contents of work:
- Preparing, inspecting and identifying water
depth, water velocity and magnetization level of soil. Stretching wire to divide
the area into detection cells with size (25x25)m or (50x50)m depending
on the topography.
- Stretching wire to divide detection cells into
detection strips 1m wide, using bomb detector placed on rubber boat to detect
in accordance with proper technical procedures to find all signals under the
water bottom at a depth from 0.5 – 3m or 5m (from the water bottom).
Unit: 10,000m2.
Code
Type of work
Consumption
components
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Water depth
0.5÷5m
> 5÷10m
>10÷15m
030.0200
Detection of
underwater boms, mines and explosive objects with bomb detector of various
types at a depth from 0.5-3m or up to 5m from the water bottom
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Anchor 50 kg
Unit
0.128
0.128
0.128
- Anchor 20 kg
Unit
0.258
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.258
- Big buoy 1m3
Unit
0.16
0.16
0.16
- Small buoy Φ 12cm
Unit
4.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4.00
- Nylon rope Φ 10mm
m
105
105
105
- Nylon rope Φ 12mm
m
7.20
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
20.40
- Nylon rope Φ 18mm
m
10.80
10.80
10.80
- Other materials
% material
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
Labor:
- Worker grade of professional serviceman 7/10 on
average
Work
13.89
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
16.83
Performance machinery:
- Foerster Ferex bomb detector
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4032 API
Shift
4.63
5.10
5.61
- Medium-size rubber boat
Shift
4.63
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
5.61
- Small- size rubber boat
Shift
4.63
5.10
5.61
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
3
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s –
Multiplied by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
3. With areas having water depth> 15m (or
offshore), there must be specific plan.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
030.0300. MARKING OF UNDERWATER SIGNALS APPLICABLE
TO DEPTHS UP TO 0.5-3M OR TO 5M FROM WATER BOTTOM
Scope of application:
To be applied to all signals detected upon
detection of underwater boms, mines and explosive objects depths up to
0.5-3m or to 5m from water bottom (in calm waters). In case of water depth<
3m, the bamboo pole is used to set for marking.
Contents of work:
- Preparing, inspecting and using bomb detecting
and correctly identifying the signal center in accordance with technical
requirements.
- Dropping buoy with red pennon and anchor to mark
the signal center in accordance with technical requirements.
Unit: 1 signal
Code
Type of work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
Water depth
0.5÷3m
> 3÷5m
>5÷10m
>10÷15m
030.0300
Marking of
underwater signals (applicable to the depths up to 0.5-3m or 5m from the
water bottom)
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Special anchor 20kg
Unit
0.00
0.008
0.008
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Plastic buoy Φ 30cm
Unit
0.00
0.067
0.067
0.067
- Nylon rope Φ 12mm
m
0.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.32
0.45
- Bamboo pole Φ 7cm, 5cm long
Unit
1
0
0
0
- Other materials
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.00
1.00
1.00
1.00
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
0.125
0.125
0.15
0.175
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster 4032API bomb detector
Shift
0.033
0.033
0.04
0.048
- Medium-size rubber
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.033
0.033
0.04
0.048
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3
4
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s –
Multiplied by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
030.0400. DIVING TO INSPECT AND HANDLE THE
UNDERGROUND SIGNALS AT A DEPTH TO 0.5M FROM WATER BOTTOM
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
To be applied to all signals which have been marked
at a depth up to 0.5m from the water bottom (in calm waters) and after marking
the location of signal which the bomb detector has found.
Contents of work:
- Preparing, inspecting and taking safety measures,
divers with diving equipment and engineering equipment to poke and dig at the
point where signals have been marked in accordance with technical requirements
up to a depth of 0.5m until the signals come out.
- Inspecting and identifying signals: if they are
magnetic objects or boms, mines and explosive objects which are safe for
collection and transport, handle them safely, lift them ashore and take them to
the prescribed place. If they are boms, mines and explosive objects or strange
explosive objects and unsafely for collection and transport, they must be
destroyed by explosion on the spot. The destruction of underwater boms, mines
and explosive objects on the spot shall have specific norm.
Unit: 1 signal
Code
Type of work
Consumption
component
Unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.5÷5m
>5÷10m
>10÷15m
030.0400
Diving to inspect and handle the underground
signals at a depth to 0.5m from water bottom
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
0.23
0.26
0.29
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster 4032API bomb detector
Shift
0.03
0.033
0.036
- Diving equipment
Shift
0.19
0.21
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Medium-size rubber boat
Shift
0.274
0.294
0.314
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
3
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s –
Multiplied by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s – Multiplied
by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
3. For diving equipment, only calculating it
when the water depth> 1.5m.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Scope of application:
To be applied to all signals which have been marked
at a depth from 0.5-1m from the water bottom (in calm waters).
Contents of work:
- Preparing, inspecting and taking safety measures,
divers with diving equipment and engineering equipment to poke, using sand and
mud blower to dig at the point where signals have been marked in accordance
with technical requirements at a depth from 0.5-1m until the signals come out.
- Inspecting and identifying signals: if they are
magnetic objects or boms, mines and explosive objects which are safe for
collection and transport, handle them safely, lift them ashore and take them to
the prescribed place. If they are boms, mines and explosive objects or strange
explosive objects and unsafely for collection and transport, they must be
destroyed by explosion on the spot. The destruction of underwater boms, mines
and explosive objects on the spot shall have specific norm.
Unit: 1 signal
Code
Type of work
Consumption
component
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Water depth
0.5÷5m
>5÷10m
>10÷15m
030.0500
Diving to inspect
and handle the underground signals at a depth from 0.5-1m from water bottom
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10 on
average
Work
0.33
0.36
0.40
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Foerster 4032API bomb detector
Shift
0.04
0.044
0.048
- Medium-size rubber boat
Shift
0.125
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.152
- Diving equipment
Shift
0.153
0.168
0.185
- Sand and mud blower
Shift
0.11
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.133
- Composite boat
Shift
0.153
0.168
0.185
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
2
3
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s –
Multiplied by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
030.0600. DIVING TO INSPECT AND HANDLE THE
UNDERGROUND SIGNALS AT A DEPTH >1-3M FROM WATER BOTTOM
Scope of application:
To be applied to all signals which have been
marked at a depth > 1-3m from the water bottom (in calm waters).
Contents of work:
- Preparing, inspecting and taking safety measures,
divers with diving equipment and engineering equipment to poke, using sand and
mud blower and sucker to dig at the point where signals have been marked in
accordance with technical requirements at a depth > 1-3m until the signals
come out.
- Inspecting and identifying signals: if they are
magnetic objects or boms, mines and explosive objects which are safe for
collection and transport, handle them safely, lift them ashore and take them to
the prescribed place. If they are boms, mines and explosive objects or strange
explosive objects and unsafely for collection and transport, they must be
destroyed by explosion on the spot. The destruction of underwater boms, mines
and explosive objects on the spot shall have specific norm.
Unit: 1 signal
Code
Type of work
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Unit
Water depth
0.5÷5m
>5÷10m
>10÷15m
030.0600
Diving to inspect
and handle the underground signals at a depth >1-3m from water
bottom
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3mm
sheet pile wall and angle iron (45x45x5)mm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
24.32
24.32
24.32
Labor:
- Worker grade of professional serviceman 7/10 on
average
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.34
0.37
0.41
Performance machinery:
- 4032API bomb detector
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.04
0.044
0.048
- Medium-size rubber boat
Shift
0.04
0.044
0.048
- Diving equipment
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.20
0.22
0.242
- Sand and mud blower and sucker
Shift
0.184
0.184
0.184
- Composite boat
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.20
0.22
0.242
1
2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s – Multiplied
by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
3.Depending on performance method to calculate
the consumption of equipment for installation and removal of sheet pile wall in
the estimate and finalization of each works.
030.0700. DIVING TO INSPECT AND HANDLE THE
UNDERGROUND SIGNALS AT A DEPTH >1-5M FROM WATER BOTTOM
Scope of application:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Contents of work:
- Preparing, inspecting and taking safety measures,
divers with diving equipment and engineering equipment to poke, using sand and
mud blower to dig at the point where signals have been marked in accordance
with technical requirements at a depth > 1-5m until the signals come out.
- Inspecting and identifying signals: if they are
magnetic objects or boms, mines and explosive objects which are safe for
collection and transport, handle them safely, lift them ashore and take them to
the prescribed place. If they are boms, mines and explosive objects or strange
explosive objects and unsafely for collection and transport, they must be
destroyed by explosion on the spot. The destruction of underwater boms, mines
and explosive objects on the spot shall have specific norm.
Unit: 1 signal
Code
Type of work
Consumption
component
Unit
Water depth
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
>5÷10m
>10÷15m
030.0700
Diving to inspect
and handle the underground signals at a depth >1-5m from water
bottom
Materials:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Kg
40.50
40.50
40.50
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Work
0.34
0.37
0.41
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Shift
0.04
0.044
0.048
- Medium-size rubber boat
Shift
0.04
0.044
0.048
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Shift
0.40
0.044
0.484
- Sand and mud blower and sucker
Shift
0.27
0.27
0.27
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Shift
0.40
0.44
0.484
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s –
Multiplied by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
- When water velocity > 1m/s or more –
Multiplied by coefficient 1,5.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
3.Depending on performance method to calculate
the consumption of equipment for installation and removal of sheet pile wall in
the estimate and finalization of each works.
030.0800. ON-THE-SPOT DESTRUCTION BY EXPLOSION
OF UNDERWATER BOMS, MINES AND EXPLOSIVE OBJECTS
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
To be applied to on-the-spot destruction of detected
boms, mines and explosive objects but unsafe for lift and collection (in calm
waters).
Contents of work:
- Preparing destruction equipment, shelter,
detonating and guarding stations; wrapping, laying explosive amount and
installing fire equipment.
- Preparing, inspecting and taking measures to
ensure safety, guarding and providing for signals.
- Carrying out detomation of boms, mines and
explosive objects in accordance with the approved techniques and plans.
Unit: 01 bomb, mine
or explosive object
Code
Type of work
Comsumption
component
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Weight of 1 bomb,
mine or explosive object (Kg)
≤ 3
>3-15
>15-50
>50-120
>120-250
>250
030.0800
On-the-spot destruction
by explosion of underwater boms, mines and explosive objects at a depth
>50cm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- TNT explosive packet
Kg
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.40
1.00
4.00
4.00
4.00
- Electric detonator No.8
Unit
1
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
2
2
-.Double wire
m
2
4
6
10
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
30
- Fabric for wrapping explosive amount
m2
0.40
1.00
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Kg
0.10
0.15
0.20
0.20
0.20
- Signboard, prohibition sign
Unit
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.08
0.08
0.08
0.08
0.08
- Other materials
% material
1.00
1.00
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1.00
1.00
1.00
Labor:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Worker grade of professional serviceman 7/10
Work
2.04
2.04
2.04
2.34
2.34
2.34
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Work
0.34
0.34
0.34
0.39
0.39
0.39
Performance machinery:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Ohmmeter
Ca
0.014
0.014
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.014
0.014
0.014
- Detonating machine
Ca
0.014
0.014
0.014
0.014
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.014
- Medium-size rubber boat
Ca
0.17
0.17
0.17
0.19
0.19
0.19
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Ca
0.34
0.34
0.34
0.39
0.39
0.39
- Diving equipment
Ca
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
0.08
0.08
0.10
0.10
0.10
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2
3
4
5
6
Note:
1. In case the waters have flow: the labor and
machinery norm as per the above table is adjusted with the following
coefficients:
- When water velocity > 0 - 0.5m/s – Multiplied
by coefficient 1.1
- When water velocity > 0.5m/s - 1m/s –
Multiplied by coefficient 1,25.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Small and medium-size rubber boats are noted
in the Norm No. 030.0100
ANNEX
NORM OF COST OF INVESTIGATION AND SURVEY TO PREPARE
PLAN AND ESTIMATE; INSPECT QUALITY OF DETECTION AND DESTRUCTION OF BOMS, MINES
AND EXPLOSIVE OBJECTS
Scope of application:
- Investigating and surveying to prepare plan and
estimate for detection and destruction of boms, mines and explosive objects.
- Assessing plan and estimate of detection and
destruction of boms, mines and explosive objects.
- Inspecting and appraising quality of works of
detection and destruction of boms, mines and explosive objects.
Contents of work:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- Preparing and assessing plan and estimate of
detection and destruction of boms, mines and explosive objects for works or
works items.
- Inspecting and appraising quality of works of
detection and destruction of boms, mines and explosive objects.
Unit: percentage
over value of approved estimate of building and installation
NO.
TYPES OF
TOPOGRAPHY
COST NORM(%)
TOTAL (%)
Investigating,
surveying and preparing plan and estimate
Inspecting and
appraising quality of works
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Open plain
2.00
1.00
3.00
2
Địa hình đô thị, khu dân cư Urban centers and
residential areas
2.50
1.00
3.50
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Midland or forest of type I
3.00
1.00
4.00
4
Forest of type II
3.50
1.00
4.50
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Forest of type III
4.00
1.00
5.00
6
Forest of type IV
4.50
1.00
5.50
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Underwater topography
3.00
1.00
4.00
Note: The cost for appraisal of plan and
estimate is prorated as per value of total estimate:
1. When the total value is less than 1 billion
dong, then the cost is 0.5%
2. When the total value is less than 3 billion
dong, then the cost is 0.3%
3. When the total value is from 3 billion dong
or more, then the cost is 0.2%
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Code
Content
Page
PART 1.
EXPLANATION AND GENERAL PROVISIONS
1
Estimated norm for detection and destruction of
boms, mines and explosive objects
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Estimated norm for detection and destruction of boms,
mines and explosive objects is defined by the grounds
3
Consumption of materials, labor và performance
machinery
4
Contents of Volume of estimated norm for
detection and destruction of boms, mines and explosive objects
5
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
6
Applicable provisions
7
Classification of signal density areas for norm
decision
PART II. ESTIMATED
NORM
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
CHAPTER I. SITE
CLEARANCE
010.0100
Site clearance by hands
010.0110
Areas having minefields
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Areas having no minefield
010.0200
Site clearance by hands with gas or oil burning
010.0300
Removal of barbed wire fence with explosive
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0100
Detection, digging
and handling of boms, mines and explosive objects by hands up to a depth of
7cm
020.0200
Inspection and on the spot destruction of boms,
mines and explosive objects up to a depth of 7cm
020.0300
Detection of boms, mines and explosive objects
with mine detector up to a depth of 30 cm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0310
Areas having minefields
020.0320
Areas having no minefield
020.0400
Digging, inspection and handling of signals up to
a depth of 30 cm
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Inspecting and destructing on the spot boms, mines
and explosive objects which cannot be collected or strange explosive objects
up to a depth of 30cm
020.0600
Detection with bomb detector at a depth from
0.3-3m to 5m or 10m
020.0700
Digging soil, inspecting and handling signals up to
a depth of 3m
020.0800
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
020.0900
Digging soil, inspecting and handling signals of
boms, mines and explosive objects up to a depth of 10m
020.1000
On the spot destruction by explosion of boms,
mines and explosive objects on the ground
CHAPTER III.
DEDETECTION AND DESTRUCTION OF UNDERWATER BOMS, MINES AND EXPLOSIVE OBJECTS
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
030.0100
Detection of underwater boms, mines and explosive
objects with bomb detector up to a depth of 0.5m from the water bottom
030.0200
Detection of underwater boms, mines and explosive
objects with bomb detector of various types at a depth from 0.5-3m or up to
5m from the water bottom
030.0300
Marking of underwater signals (applicable to the
depths up to 0.5-3m or 5m from the water bottom)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Diving to inspect and handle the underground signals
at a depth to 0.5m from water bottom
030.0500
Diving to inspect and handle the underground
signals at a depth from 0.5-1m from water bottom
030.0600
Diving to inspect and handle the underground
signals at a depth >1-3m from water bottom
030.0700
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
030.0800
On-the-spot destruction by explosion of
underwater boms, mines and explosive objects
Annex. Norm of cost of investigation and survey
to prepare plan and estimate; inspect quality of detection and destruction of
boms, mines and explosive objects