|
MINISTRY
OF SCIENCE AND TECHNOLOGY OF VIETNAM
--------
|
THE
SOCIALIST REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
---------------
|
|
No.
05/VBHN-BKHCN
|
Hanoi,
December 31, 2025
|
CIRCULAR
MEASUREMENT OF PRE-PACKED GOODS
Circular No.
21/2014/TT-BKHCN dated July 15, 2014 of the Minister of Science and Technology
on measurements of pre-packaged goods, effective from August 30, 2014, amended
by:
Circular No.
07/2024/TT-BKHCN dated October 08, 2024 of the Minister of Science and
Technology on amendments to legislative documents within the jurisdiction of
the Minister of Science and Technology related to Commission for the Standards,
Metrology and Quality of Vietnam (STAMEQ), effective from November 22, 2024.
Circular No.
58/2025/TT-BKHCN dated December 31, 2025 of the Minister of Science and
Technology on amendments to some Circulars for simplification of administrative
procedures related to production and business operation within the jurisdiction
of the Ministry of Science and Technology, effective from December 31, 2025.
Pursuant to the Law on
Measurement dated November 11, 2011;
Pursuant to the
Government's Decree No. 86/2012/ND-CP dated October 19, 2012 elaborating the
Law on Measurement;
Pursuant to the
Government's Decree No. 89/2006/ND-CP dated August 30, 2006 of goods labels;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
At the request of
Director of the Directorate for Standards, Metrology, and Quality,
The Minister of Science
and Technology promulgates a Circular on measurement of pre-packed goods.
Chapter I
GENERAL
PROVISIONS
Article 1. Scope
1. This Circular
specifies the measurements of quantities of pre-packed goods, including:
technical requirements applied to measurements of quantities of pre-packed
goods; true quantity markings; declaration of use of true quantity markings on
labels of Group 1 pre-packed goods.
2. This Circular does
not apply to pre-packed goods being medicines, goods given customs privileges
or exemptions; temporarily imported goods; goods in transit; goods in bonded
warehouses; goods processed by Vietnamese companies for foreign traders;
imported components of machinery and equipment serving project of investment;
classified goods; goods serving emergency needs; goods DIRECTLY serving special
measurement activities for national defense and security.
Article 2. Regulated
entities
1. Organizations and
individuals (hereinafter referred to as "facilities") that
manufacture, import, transport, sell pre-packed goods.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 3. Definitions
For the purposes of
this document, the terms below are construed as follows:
1. "pre-packed
goods" are goods of which the quantity is expressed as a unit of weight,
volume, area, length, or as pieces (pcs), and are packed and quantified without
the presence of the buyers.
2. "Group 1
pre-packed goods" are pre-packed goods that are not on the list mentioned
in Clause 3 of this Article.
3. "Group 2
pre-packed goods" are pre-packed goods that are sold on the market in
large quantities or have high value that are likely to cause disputes over
measurements among parties, or considerably affect human health or the
environment. The list of Group 2 pre-packed goods is prescribed in Article 6 of
this Circular.
4. A "unit"
or "pack" or pre-packed goods means a collection of package and
quantity of goods contained therein.
5. "package"
refers to the material used to wrap pre-packed goods, except materials that are
part of the goods by nature.
6. "real
quantity" (Qr) means the quantity of pre-packed goods in the
package and is determined with proper instruments.
7. "unconformable
unit of pre-packed goods" means a unit of pre-packed goods of with the
real quantity smaller than the minimum quantity (Qmin).
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Qmin = Qn
- T
Tolerance (T) is
elaborated in Appendix IV enclosed herewith.
9. "nominal
quantity" (Qr) means the quantity of pre-packed goods written
on the goods label.
10. "average
value" (Xtb) of a quantity of pre-packed goods means the value
prescribed in Clause 3 Article 3 of the Government's Decree No. 86/2012/ND-CP
dated October 19, 2012 on guidelines for the Law on Measurement.
11. "batch of
pre-packed goods" (hereinafter referred to as "batch") means a
collection of identical units of pre-packed goods that are manufactured,
imported, transported, or sold with a nominal quantity under the same
conditions from which samples are taken for assessment of conformity with
technical measurement requirements.
12. "batch
size" (N) means the total number of units of pre-packed goods in the batch
and is determined as follows:
a) Where goods are
manufactured, the batch size is expressed as the number of units of pre-packed
goods manufactured in an hour;
b) Where goods are
imported, the batch size is expressed as number of units of pre-packed goods
imported;
c) Where goods are
transported or sold, the batch size is expressed as the number of units of
pre-packed goods being transported on the vehicle, contained in the storage or
store;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
13. "sample
size" (N) means the number of units of pre-packed goods taken as samples
from in the batch for assessment.
14. "number of
unconformable units of pre-packed goods" means the number of units of
pre-packed goods that are not conformable with requirements, which is
determined during assessment of the batch of pre-packed goods.
15. "solvent"
means the liquid or gas that is packaged together with pre-packed goods and is
discarded when pre-packed goods are used.
16. "dry
content" means the true quantity of pre-packed goods in a liquid solvent.
17. "manufacturer
of pre-packed goods" means the facility that carries out the
manufacturing, packaging, or bottling stage in Vietnam.
18. "importer of
pre-packed goods" means the facility that imports or entrusts the import
of pre-packed goods.
19. Other terms shall
be construed as interpreted in Article 3 of the Law on Measurement.
Chapter II
TECHNICAL
MEASUREMENT REQUIREMENTS APPLIED TO QUANTITIES OF PRE-PACKED GOODS, LIST OF
GROUP 2 PRE-PACKED GOODS
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. Presentation of
quantity of pre-packed goods on the label
a) The quantity of
pre-packed goods on the label shall be the nominal quantity;
b) The nominal quantity
(Qn) of pre-packed goods shall be printed, affixed or stuck directly
on pre-packed goods or their packages or labels;
c) The position of
nominal quantity must be noticeable and legible when goods are displayed in
normal conditions;
d) If the nominal
quantity is “net weight” or “true volume”, the world “approximate” or “minimum”
must not be used e.g. approximate net weight or minimum true volume;
dd) The nominal
quantity shall be expressed as a value together with a legal unit of
measurement or pcs; there must be a space between the number and the unit;
e) The nominal quantity
of pre-packed goods measured in a unit of weight or volume shall be presented
as follows:
- Pre-packed goods that
are solids, liquefied gas, frozen, aerosols, or contained together with
compressed air shall be measured in a unit of weight.
- Goods that are in
liquid form shall be measured in a unit of volume;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
g) The unit of nominal
quantity depends on the quantity as prescribed in Appendix I enclosed herewith.
h) The minimum height
of the text and number expressing the nominal quantity must comply with
Appendix II enclosed herewith;
i) When a unit of
pre-packed goods contains multiple packs of pre-packed goods of the same
category and in a nominal quantity that can be sold retail, the total nominal
quantity of the unit of pre-packed goods, the number of packs and nominal
quantity in a pack must be specified.
Example: A box of coffee
contains 10 packs; the net weight of each pack is 20 g. The nominal quantity of
the box of coffee shall be written as follows:
200 g (10 packs x 20 g)
k) When a unit of
pre-packed goods contains multiple packs of pre-packed goods of different
categories, the names, the number of packs and nominal quantity goods of each
category in a separate pack must be specified.
Example: 01 pack of shoe polish
contains 02 boxes of black polish, each of which weighs 15 g; 01 box of brown
polish that weights 25 g; 01 box of white polish that weighs 15 g. Nominal
quantity of the pack shall be written as follows:
Black polished: 2 boxes
x 15 g; brown polish: 1 box x 25 g; white polish: 1 box x 15 g.
Total: 4 boxes (70 g).
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Requirements applied
to shapes, sizes, and other aspects of pre-packed goods packages
a) The shape, size, and
structure of packages of pre-packed goods must not confuse or mislead buyers
about the quantity of pre-packed goods contained therein (such as having
secondary bottom, partition, secondary cover, etc.);
b) Pre-packed goods
must fill the volume of the package, unless there is a difference between the
volume of the package and volume of pre-packed goods contained therein because
of:
- Protection of
pre-packed goods;
- Requirements of the
equipment used for wrapping pre-packed goods;
- Requirements of the
transport of pre-packed goods;
- The nature of
pre-packed goods (aerosols cans, etc.)
c) If the quantity of
pre-packed goods is written at various positions on the package, the quantity
at each of the positions must comply with regulations in Clause 1 of this
Article;
d) Information about
additional or complimentary quantity of pre-packed goods must be specified
together with the nominal quantity on the label, unless the manufacturer
clearly states that such additional or complementary is included in the nominal
quantity of pre-packed goods.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. Mean value Xtb
a) If the sample size
(n) equals (=) the batch size (N), mean value (Xtb) of real quantity
(Qr) of the units of pre-packed goods in the batch must satisfy the
expression below:
Xtb ³ Qn
b) If the sample size
is smaller than the batch size (n < N), the mean value (Xtb) must
satisfy the expression below:
Xtb ³ Qn - k.s
Where:
s: the
squared deviation of real quantity calculated using the formula in Appendix III
hereof.
k: a coefficient in
Appendix III enclosed herewith.
2. Number of
unconformable units of pre-packed goods;
a) In case the sample
size is equals (=) the batch size (n=N), the following requirements must be
satisfied:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
- No unconformable unit
of pre-packed goods has a deficit exceeding twice the tolerance (T) prescribed
in Appendix IV enclosed herewith.
b) If the sample size
is smaller than the batch size (n < N), the following requirements must be
satisfied:
- The number of
unconformable units of pre-packed goods must not exceed the permissible limit
in Table 1, Table 2 (if samples are taken where goods are manufactured,
imported, transported, or sold), or Table 3 (if packages must be opened to take
samples) in Appendix III hereof.
- No unconformable unit
of pre-packed goods has a deficit exceeding twice the tolerance (T) prescribed
in Appendix 4 hereof.
Article 6. (annulled)
Chapter III
TRUE
QUANTITY MARKING
Article 7. True
quantity marking
1. True quantity
marking is the symbol showing that the quantity of pre-packed goods is
conformable with Article 4 and Article 5 of this Circular.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 8. Use of true
quantity marking
1. Group 1 pre-packed
goods shall bear the true quantity marking if requirements in Article 4 and
Article 5 are fulfilled, and the use of the true quantity marking is self-declared
by a facility that meets the requirements in Article 10 or Article 11 as
prescribed in Section 2 Chapter IV of this Circular.
2. (annulled)
Article 9. Presentation
of true quantity marking on labels of pre-packed goods
1. The true quantity
marking shall be printed, affixed or stuck directly on the goods, packages or
labels thereof where it is noticeable and legible.
2. The color of the
true quantity marking shall be the same as that of the nominal quantity and be
placed before the nominal quantity of pre-packed goods. There must be a space
between the true quantity marking and the nominal quantity.
Example: V 800 g or V
500 ml.
Chapter IV
DECLARATION
OF USE OF TRUE QUANTITY MARKING, CERTIFICATION OF ELIGIBILITY FOR USE OF TRUE
QUANTITY MARKING
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 10.
Requirements applied to manufacturers of pre-packed goods
1. The facility is
established in accordance with law.
2. The technical
facilities satisfy the requirements below:
a) There are sufficient
instruments for quantifying pre-packed goods (applied to manufacturers) or
measuring instruments for assessing the conformity of pre-packed goods quantity
(applied to facilities carrying out self-assessment of conformity of pre-packed
goods quantity); the measuring instruments are periodically inspected and
calibrated as prescribed;
b) The workplace,
environmental conditions, and other conditions are conformable with Clause 4 of
this Article.
3. There are adequate
technicians in charge of measurement control measures as prescribed in Clause 4
of this Article.
4. Measures for quality
control of measuring instruments, quantifying instruments and measuring tasks
(hereinafter referred to as "measurement control measures") are taken
to ensure fulfillment of technical measurement requirements of pre-packed
goods.
5. Documents about
inspection and calibration results, documents about technical assessment of
quantity of pre-packed goods (carried out by the facility itself) are fully
retained.
Article 11.
Requirements applied to importers of pre-packed goods
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Measurement control
measures are adopted and implemented to ensure fulfillment of technical
measurement requirements of quantity of pre-packed goods.
Section 2. DECLARATION
OF USE OF TRUE QUANTITY MARKING
Article 12. Procedures
for declaring the use of true quantity marking
1. The facility that
satisfies the requirements in Article 10 and Article 11 of this Circular shall
make 02 copies of the declaration of the use of the true quantity marking on
pre-packed goods labels (hereinafter referred to as declaration) using the form
No. 1. CBDĐL in Appendix V hereof, then submit them, whether in person or by
post, to the Department of Standards, Metrology and Quality of the province or
city where the facility is headquartered.
2. If the declarations are
not satisfactory, within 03 working days from the receipt of the declaration,
the Department of Standards, Metrology and Quality shall notify the facility of
necessary additions or supplementation.
If the facility fails
to submit the satisfactory declarations within 30 days from the day on which
the notification is sent by the Department of Standards, Metrology and Quality,
the Department of Standards, Metrology and Quality is entitled to stop
processing the declaration.
3. If the declarations
are satisfactory, within 05 working days from their receipt, the Department of
Standards, Metrology and Quality shall append its seal onto 02 declarations and
return one of them to the facility.
4. The Department of
Standards, Metrology and Quality shall keep a log of submitted declarations
Article 13. Retention
of declaration dossiers
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
a) The declaration
bearing the seal of the Department of Standards, Metrology, and Quality;
b) The document issued
by the head of the facility on control measures for ensuring fulfillment of
technical measurement requirements of pre-packed goods.
c) Documents about
inspection and calibration results, documents about technical assessment of
quantity of pre-packed goods, and documents about implementation of other measurement
control measures.
2. Retention period: 02
years after the documents are replaced, invalidated, or expired.
Article 14. Adjustments
to the declaration
1. When there is any
change to the contents of the submitted declaration, or the declaration is lost
or damaged, the facility shall re-initiate the procedures in Article 12 of this
Circular.
2. The submitted
declarations shall be numbered continuously from the first submission.
Article 15.
Invalidation of declaration
1. The declaration of
the use of true quantity marking on pre-packed goods shall be invalidated in
the following cases:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
b) The facility sends a
notification of invalidation of the declaration to the local Department for
Standards, Metrology and Quality;
c) The facility goes
bankrupt or is dissolved as prescribed by law.
2. In the cases
prescribed in Point b Clause 1 of this Article, the Department of Standards,
Metrology, and Quality shall append its signature and seal on the notification
of invalidation, send it back to the facility, and make an entry in the
logbook.
Section 3 (annulled)
Chapter V
RESPONSIBILITIES
OF ORGANIZATIONS AND INDIVIDUALS
Article 25.
Responsibilities of organizations and individuals that manufacture, import,
transport, and/or sell pre-packed goods
1. Responsibilities of organizations
and individuals that manufacture and/or import pre-packed goods:
a) Maintain fulfillment
of the requirements in Article 10 or Article 11 of this Circular;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
c) Inform the customers
and users of transport and storage conditions of pre-packed goods.
d) Ensure that the
quantity of pre-packed goods meets technical measurement requirements in this
Circular;
dd) When receiving a
notification from another entity or finding that their pre-packed goods are not
conformable with technical measurement requirements, take remedial measures and
notify competent measurement authorities of the remedial measures and results
thereof;
e) (annulled)
g) Facilitate measurement
inspections by competent authorities and persons;
h) By January 31 every
year or whenever requested, submit a report on the use of true quantity marking
on labels of pre-packed goods using form No. 3.BCTH in Appendix V hereof to the
provincial Department of Standards, Metrology and Quality that received the
declaration.
2. Responsibilities of organizations
and individuals that transport and/or sell pre-packed goods:
a) Provide truthful
information about quantity of pre-packed goods;
b) Inform the customers
or users of transport and storage conditions of pre-packed goods;
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
d) Only transport and
sell pre-packed goods conformable with technical measurement requirements;
dd) Facilitate
measurement inspections by competent authorities and persons.
Article 26.
Responsibilities of Commission for the Standards, Metrology and Quality of
Vietnam (STAMEQ)
1. (annulled).
2. Provide instructions
on assessment methods and procedures; issue regulations on measurement;
consider approving training programs and materials; provide training in evaluation
of pre-packed goods quantity.
3. Carry out state
inspection of pre-packed goods quantity within its jurisdiction as prescribed
by regulations of law on measurements.
4. Provide professional
instructions on measurement of pre-packed goods quantity; disseminate
regulations of this Circular among relevant organizations and individuals.
5. Inspect the receipt
of declarations of the use of true quantity markings by provincial Departments
of Standards, Metrology and Quality every 02 years or at the request of
competent authorities.
6. Carry out
inspections; handle complaints and denunciations; impose penalties for
violations against the laws on measurements.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1. Instruct provincial
Departments of Standards, Metrology and Quality to inspect quantities of
pre-packed goods as prescribed in Clause 3 Article 13 of the Government's
Decree No. 86/2012/ND-CP dated October 19, 2012 and Circular No.
28/2013/TT-BKHCN dated December 17, 2013.
2. Direct the
inspections of adherence to regulations of law on measurements in their
provinces and cities.
Article 28.
Responsibilities of provincial Departments of Standards, Metrology, and Quality
1. Disseminate
regulations of this Circular among relevant organizations and individuals.
2. Receive and certify declarations
of use of true quantity markings, keep a log of receipt of these declarations
as prescribed in this Circular.
3. Carry out state
inspection of quantities of pre-packed goods in their provinces and cities in
accordance with regulations of law on measurements.
4. Cooperate in
inspections, handling complaints and denunciations, imposing penalties for
violations against the laws on measurements.
5. By every March 31 or
whenever requested by competent authorities, submit a consolidated report to
STAMEQ on the receipt of declarations of use of true quantity markings on
labels of pre-packed goods; results of inspections of pre-packed goods quantity
in their provinces and cities.
Chapter VI
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Article 29. Entry into
force
1. This Circular enters
into force from August 30, 2014.
2. The following
legislative documents are annulled:
a) Decision No.
02/2008/QD-BKHCN dated February 25, 2008 of the Minister of Science and
Technology on "Inspection of pre-packed goods quantity";
b) Decision No.
07/2008/QD-BKHCN dated July 08, 2008 of the Minister of Science and Technology
on "List of pre-packed goods subject to state management”.
Article 30.
Organization of implementation
1. President of STAMEQ
shall provide guidance and organize the implementation of this Circular.
2. Heads of competent
authorities, relevant organizations and individuals are responsible for the
implementation of this Circular.
3. Difficulties that
arise during the implementation must be reported to the Ministry of Science and
Technology for consideration./.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
VERIFIED
BY
MINISTER
Nguyen
Manh Hung
APPENDIX
I
PRESENTATION OF MEASUREMENT UNITS
(Promulgated together with the Circular no. 21/2014/TT-BKHCN dated July 15,
2014 of the Minister of Science and Technology)
Nominal
quantity (Qn)
Measurement
unit
Value
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Qn
< 1 g
Weight
mg
1
g £ Qn <
1000 g
g
Qn
³ 1000 g
kg
Qn
£ 999 mL
Volume
(liquid)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Qn
³ 1L
L
(l)
Qn
≤ 1000 cm3 (1 dm3)
Volume
(solid)
cm3,
mL (ml)
1
dm3 < Qn < 1000 dm3
dm3,
L (l)
Qn
³ 1000 dm3
m3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Length
mm or mm
1
mm £ Qn <
100 cm
mm
or cm
Qn
³ 100 cm
m
Qn
< 100 cm2 (1 dm2)
Area
mm2
or cm2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
dm2
Qn
³ 1 m2
m2
APPENDIX
II
MINIMUM HEIGHT OF TEXT AND NUMBERS
(Promulgated together with the Circular no. 21/2014/TT-BKHCN dated July 15,
2014 of the Minister of Science and Technology)
Nominal
quantity (Qn)
Minimum
height of text and numbers (mm)
g
or mL
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
≤
50
2
>50
to 200
3
>200
to 1000
4
kg
or L
>
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Units
of length, area, pcs
2
APPENDIX
III
CALCULATION OF s AND COEFFICIENT k
(Promulgated together with the Circular no. 21/2014/TT-BKHCN dated July 15,
2014 of the Minister of Science and Technology)
1. Calculation of s
Squared deviation s of
real quantity is calculated using the formula below:
Where 
is the real quantity of the i-th
unit of pre-packed goods (i = 1, 2,...,n);
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Coefficient k varies
according to the batch size (N), sample size (n), sampling place, units of
measurement (weight, volume, length, area, or pcs), and is determined as
follows:
+ If samples of
pre-packed goods are measured in a unit of weight or volume, coefficient k
shall be chosen from Table 1.
Table
1
Batch
size (N)
Sample
size (n)
Coefficient
(k)
Permissible
number of unconformable units of pre-packed goods (m)
1
to 10
N
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
-
11
to 50
10
1,028
0
51
to 99
13
0,848
1
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
50
0,379
3
501
to 3200
80
0,295
5
>
3200
125
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
7
+ If samples of pre-packed
goods are measured in a unit of length, area, or pcs, coefficient k shall be
chosen from Table 2.
Table
2
Batch
size (N)
Sample
size (n)
Coefficient
(k)
Permissible
number of unconformable units of pre-packed goods (m)
1
to 25
N
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
-
26
to 50
3
1,00
0
51
to 150
5
0,35
0
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
8
0,20
1
501
to 3200
13
0,15
1
>
3200
20
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
+ If samples of
pre-packed goods are measured in a unit of weight or volume and the packages
must be opened, coefficient k shall be chosen from Table 3.
Table
3
Batch
size (N)
Sample
size (n)
Coefficient
(k)
Permissible
number of unconformable units of pre-packed goods (m)
≥
100
20
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1
APPENDIX
IV
TOLERANCE (T)
(Promulgated together with the Circular no. 21/2014/TT-BKHCN dated July 15,
2014 of the Minister of Science and Technology)
No.
Nominal
quantity (Qn)
Tolerance
(T)
1
in
g or mL
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
in
% of Qn
in
g or mL
>
0 to 5 (2)
-
-
>5
to 50
9
-
>50
to 100
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
4,5
>100
to 200
4,5
-
>200
to 300
-
9
>300
to 500
3
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
>500
to 1000
-
15
>1000
to 10000
1,5
-
>10000
to 15000
-
150
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1,0
-
2
in
m
in
% of Qn
Qn
£ 5
Unconformable
units of pre-packed goods not allowed
Qn
> 5
2
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
in
m2
in
% of Qn
All
Qn
3
4
in
pcs
in
% of Qn
Qn
£ 50
Unconformable
units of pre-packed goods not allowed
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
1(3)
Notes:
(1): in Section 1, T
may be rounded to the nearest tenth of g (or m)L if Qn £ 1000 g (1000 mL) or to
the nearest unit of g (or mL) if Qn > 1000 g (or 1000 mL);
(2): Only Xtb
has to be conformable;
(3): T is rounded to
the nearest integer.
APPENDIX
V
SET FORMS
(Promulgated together with the Circular no. 21/2014/TT-BKHCN dated July 15,
2014 of the Minister of Science and Technology)
1. Form No. 1.CBDĐL:
Declaration of use of true quantity marking on pre-packed goods label.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
3. Form 3.BCTH:
Report on use of true quantity marking on pre-packed goods labels
4. Form No. 4.GCN (annulled)
Form No. 1. CBDĐL
21/2014/TT-BKHCN
THE
SOCIALIST REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
---------------
DECLARATION OF USE OF TRUE QUANTITY MARKING
ON PRE-PACKED GOODS LABEL
No.
………………
Name of
manufacturer/importer:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Tel: ………………; Fax:
…………………; Email: …………………………
Transaction office
address (if any): …………………………………………………
Address of
manufacturing facility (if different from headquarters) or place of import:
……………..
………………………………………………………………………………………
DECLARATION
True quantity marking
"V" is used on labels of the following pre-packed goods
No.
Name
of pre-packed goods
Nominal
quantity (Qn)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Received
by Department of Standards, Metrology and Quality of
.......................
for the …… time
[Location,
date]
(Full name, signature, seal)
[Location,
date]
Head of manufacturer/importer
(Full name, signature, seal)
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Form No. 3.BCTH
58/2025/TT-BKHCN
NAME
OF SUPERVISORY BODY
NAME
OF FACILITY
-------
THE
SOCIALIST REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
---------------
No.
………………
....,
[Location, date]
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
(Period:
From ........... to ...............)
To:
..........................(1)....................
Reporting facility:
.............................................................
Headquarters address:
..................................................................................
Tel:
.......................Fax: .......................
Email:...............................
Transaction office address (if any):
…………………………………………………
Address of manufacturing facility (if different
from headquarters): ……………..
Declaration receipt
note (2):
1. Use of true quantity
marking "V" on labels pre-packed goods:
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
Name
of pre-packed goods
Nominal
quantity (Qn)
Package
weight
Manufacture/Import
quantity
Quantity
of goods sold
Quantity
of goods in stock
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.
2. Inspection:
Inspection record (if
any):………….
3. Settlement of
complaints and denunciations (if
any):............................................
4. Proposals: ..........................................................................................................
Head
of facility
(Full
name, signature, seal)
(1): Name
of receiving authority or certifying authority.
...
...
...
Hãy đăng nhập hoặc đăng ký Thành viên
Pro tại đây để xem toàn bộ văn bản tiếng Anh.