|
MINISTRY OF
INDUSTRY AND TRADE
----------
|
SOCIALIST
REPUBLIC OF VIET NAM
Independence-Freedom-Happiness
-----------------
|
|
No.: 3283/QD-BCT
|
Hanoi, August 21,
2017
|
DECISION
IMPOSITION
OF OFFICIAL ANTI-DUMPING MEASURE ON H-SHAPED STEEL PRODUCTS IMPORTED FROM THE
PEOPLE’S REPUBLIC OF CHINA
MINISTER OF INDUSTRY AND TRADE
Pursuant to the Ordinance on Anti-dumping
No. 20/2004/PL-UBTVQH11 dated April 29, 2004 of the Standing Committee of
the National Assembly on Anti-dumping;
Pursuant to the Government’s Decree No.
90/2005/ND-CP dated July 11, 2005 providing guidelines for the Ordinance on
Anti-dumping;
Pursuant to the Government’s Decree No.
98/2017/ND-CP dated August 18, 2017 defining the Functions, Tasks, Powers and
Organizational Structure of the Ministry of Industry and Trade;
At the request of the Director of the Trade
Remedies Authority of Vietnam;
HEREBY DECIDES:
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
Article 2. H-shaped steel products imported from Hong Kong shall be no
longer regulated by Decision No. 957/QD-BCT dated March 21, 2016 of the
Ministry of Industry and Trade on imposition of provisional anti-dumping
measure on H-shaped steel products imported from the People’s Republic of China
(including Hong Kong).
Article 3. The amount of the anti-dumping duty paid for the shipments
of H-shaped steel products imported from Hong Kong into Vietnam in accordance
with Decision No. 957/QD-BCT dated March 21, 2016 of the Ministry of Industry
and Trade shall be returned.
Article 4. This Decision comes into force 15 days after the date on
which it is promulgated.
Article 5. Director of Trade Remedies Authority of Vietnam, Chief of
the Ministry’s Office, and heads of relevant units and parties shall be
responsible for the implementation of this Decision./.
MINISTER
Tran Tuan Anh
APPENDIX 1
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
1. Goods on which the official anti-dumping
measure is imposed
1.1. Name of goods: H-shaped
steel
1.2. Description of goods
Alloy or non-alloy H-shaped steel has a vertical
center web with horizontal top and bottom flanges. H-shaped steel is also known
as "H-beam", "W-beam" or wide-flange steel1.
1.3. Goods which are not subject to the
official anti-dumping measure
H-shaped steel described in Section 1.2 of this
Announcement shall not be subject to the official anti-dumping measure if it
meets one of the following conditions2:
- It is of a height of not less than 700mm (±4mm)
or a width of not less than 300mm (±3mm)3; or
- It has a dimension of 100mm x 55mm or 120mm x
64mm1.4. Origin of goods: The People’s Republic of China (or
China)
1.5. HS codes
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
2. Final determination
The investigating authority concluded that there
are: (i) dumped imports, (ii) material retardation of the establishment
of the domestic industry and (iii) a causal link between the dumped imports and
the material retardation of the establishment of the domestic industry. Details
of the final determination are provided in Appendix 2 – Final Determination
(non-confidential version).
3. Official anti-dumping duty
Based on the final determination and comments of
the Anti-dumping and Countervailing Council, the Minister of Industry and Trade
decides to impose the official anti-dumping measure on H-shaped steel products
described in Section 1 hereof by means of charging extra import duty as
follows:
Table 1. Official
anti-dumping duty rates
Column 1
Column 2
Column 3
Column 4
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
Trade company
Provisional
anti-dumping duty rate
Official
anti-dumping duty rate
1. Heibei Jinxi Iron and Steel Group Co., Ltd.
2. Hebei Jinxi Section Steel Co., Ltd.
1. Cheongfuli (Hongkong) Company Limited
2. Cheongfuli (Xiamen) Co. Ltd.
3. China-Base Ningbo Foreign Trade Co., Ltd.
4. Hangzhou CIEC International Co., Ltd.
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
6. Hangzhou Cogeneration (Hong Kong) Company
Limited
7. Rich Fortune Int'l Industrial Limited
8. China Oriental Singapore Pte Ltd.
9. China Oriental Group Company Limited
29,40%
22,09%
1. Rizhao Steel Holding Group Co., Ltd.
2. Rizhao Medium Section Mill Co., Ltd.
1. Bright Ruby Resources PTE Limited
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
20,48%
Non-cooperating manufacturers and exporters
36,33%
29,17%
4. Guidelines for determination of the official
anti-dumping duty
Step 1: Inspect Certificate of Origin (C/O)
- Case 1: If no valid C/O is presented, the rate of
the official anti-dumping duty shall be 29,17%.
- Case 2: If the presented C/O is issued by a
competent authority of a country or territory other than China, no official
anti-dumping duty will be imposed.
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
Step 2: Inspect the mill-test certificate
issued by the manufacturer or other equivalent document showing the
manufacturer's name (hereinafter referred to as "manufacturer's
certificate")
- Case 1: If no manufacturer’s certificate is
presented, the rate of the official anti-dumping duty imposed shall be 29,17%.
- Case 2: If a manufacturer’s certificate is
presented but it does not contain the name of one of the companies specified in
Column 1 Table 1 hereof, the rate of the official anti-dumping duty imposed
shall be 29,17%.
- Case 3: If the manufacturer’s certificate that
contains the name of one of the four companies specified in Column 1 Table 1
hereof, including (i) Heibei Jinxi Iron and Steel Group Co., Ltd.; (ii) Hebei
Jinxi Section Steel Co., Ltd.; (iii) Rizhao Steel Holding Group Co., Ltd.; and
(iv) Rizhao Medium Section Mill Co., Ltd., guidelines in Step 3 shall apply.
Step 3: Inspect name of exporter
- Case 1: If the exporter’s name (specified in the
sales contract and commercial invoice) coincides with the name of one of the
manufacturers, exporters or trade companies specified in Column 1 or Column 2
Table 1 hereof, the official anti-dumping duty imposed shall be the
corresponding duty rate specified in Column 4 Table 1 hereof.
- Case 2: If the exporter’s name (specified in the
sales contract and commercial invoice) does not coincide with the name of one
of the following manufacturers/exporters specified in Column 1, including (i)
Heibei Jinxi Iron and Steel Group Co., Ltd.; (ii) Hebei Jinxi Section Steel
Co., Ltd.; (iii) Rizhao Steel Holding Group Co., Ltd.; and (iv) Rizhao Medium
Section Mill Co., Ltd., or the trade companies specified in Column 2 Table 1,
the rate of the official anti-dumping duty imposed shall be 29,17%.
5. Difference in anti-dumping duty rates
If the official anti-dumping duty rate is higher
than the provisional one, the amount of the import duty overpaid shall be
refunded.
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
The official anti-dumping duty comes into force 15
days after the date on which the decision on imposition of the official
anti-dumping measure is issued, i.e. from September 05, 2017.
The official anti-dumping duty shall be imposed for
a period of 05 (five) years commencing from the date on which it comes into
force to September 07, 2022 inclusively.
This period of validity may be extended or the rate
of anti-dumping duty may be adjusted according to the results of review of
anti-dumping duty given by the investigating authority.
7. Subsequent procedures
After the decision on imposition of the official
anti-dumping measure comes into force, customs authorities shall collect import
duties charged on goods on which the official anti-dumping duty is imposed.
If importers think that their imported H-shaped
steel products bearing HS codes specified in Section 1 hereof are not the goods
on which the official anti-dumping measure is imposed, they are advised to
petition for review within the prescribed time limit for the first review on
the case.
8. Contact information
Information on the decision on imposition of the
official anti-dumping measure can be found and downloaded by visiting the
following website of the Ministry of Industry and Trade (www.moit.gov.vn).
Detailed contact information:
...
...
...
Bạn phải
đăng nhập hoặc
đăng ký Thành Viên
TVPL Pro để sử dụng được đầy đủ các tiện ích gia tăng liên quan đến nội dung TCVN.
Mọi chi tiết xin liên hệ:
ĐT: (028) 3930 3279 DĐ: 0906 22 99 66
Address: 25 Ngo Quyen Street, Hoan Kiem District,
Hanoi City, Vietnam
Telephone: (+84 4) 222.05.002 (Ext.: 1038)
Investigators in charge:
Phung Gia Duc – Email: ducpg@moit.gov.vn
Vu Tuan Nghia - Email:
nghiavt@moit.gov.vn
1 W-beam or W-Section means Wide flange beam as defined
by the American Society for Testing and Materials (ASTM),
and is also known as H-beam as regulated in the Japanese Industrial Standards
(JIS). These terms are commonly used on the steel market and are similar trade
names used in the steel industry.
2 The investigating authority determines that the goods
described in Section 1.3 cannot be manufactured domestically (Further details
are provided in Appendix 2 – Final Determination (Non-confidential version))
3 Section 7.1 Dimensions, cross-sectional area, weight
per meter and cross-sectional properties of H-shaped steel and Section 7.2
Tolerances on dimensions and shape – National Standard TCVN 7571-16:2017
Hot-rolled steel sections – Part 16: H sections